Anil,
        It is not a good idea to use an IP address in the From or Two headers for quite a few reasons. A few examples; if the device is on a IP Private network and you populate this field into the From header it is not unique outside it's own Private network.

        In the SDP the 'c' connection field should have the actual IP address of the endpoint  - although this may be re-written by a FW ALG for NAT traversal - the 'o' origin line in the SDP should includes the actual IP address of the originator and will not be changed by FW ALG etc.

Regards,

Wayne Davies
System Support Engineer - Broadsoft

Office: +61 3 96260468
Mobile: 0417282909
email:   [EMAIL PROTECTED]



Anil Bollineni <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]

21/02/2004 11:37 AM

       
        To:        "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>, "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
        cc:        
        Subject:        [Sip] From Header



Hi All,
 
      I understand from the following statement in RFC, that From header SHOULD not contain IP addresses/ports from whom the request has come. If it is so, I can't assume that the information is not used to assume from where (IP address/port) the request has come. Appreciate your response to clarify the point.
 
  As such, it is very important that the From URI not contain IP addresses or the FQDN
   of the host on which the UA is running, since these are not logical
   names.
 
Thank you,
Anil
 

This email contains material that is confidential. The content of this email is for the sole use of the intended recipient(s). Any review or distribution by persons other than the intended recipient(s) without the express permission of NetScreen Technologies, Inc. is strictly prohibited. If you are not the intended recipient, please contact the sender and delete/destroy all copies of this email and any related attachments. NetScreen does not guarantee the accuracy or completeness of third party materials or information.
 



******************************************************************************
- NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information. If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************

_______________________________________________
Sip-implementors mailing list
[EMAIL PROTECTED]
http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors

Reply via email to