Hi Matthew, You have to change the Via also. Something like this ..
Via:SIP/2.0/TCP 172.16.25.17:5060;branch=z9hG4bK-c7542 Regards, Somesh S. Shanbhag --- Matthew Gardiner <[EMAIL PROTECTED]> wrote: > Hi all, > > Could somebody please list the part(s) of a SIP > message which must be > changed in order to indicate to a SIP stack that the > message should be sent > using TCP? > > I imagine these to be the Contact: header, in order > that the UAS knows > whether or not to formulate a TCP or UDP packet for > a future request and the > Request-URI to indicate to the transmission logic in > the stack that the > destination is listening on a TCP port. If someone > could confirm/deny my > assumptions that would be greatly appreciated. > > thanks for your time, > > Matthew Gardiner > Software Engineer > Aculab > > > _______________________________________________ > Sip-implementors mailing list > [email protected] > http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors > ----------------------------------------- SIMPLICITY IS THE BEAUTY. BE NATURAL LIVE NATURAL. ----------------------------------------- Somesh S. Shanbhag Focus Area - VoIP Team (FA-VoIP) Mascon Global Communication Technologies Enterprise of Mascon Global Limited #59/2, 100Ft Ring Road Banashankari II stage Bangalore-560070 Karnataka INDIA Website: http://www.masconit.com ----------------------------------------- __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com _______________________________________________ Sip-implementors mailing list [email protected] http://lists.cs.columbia.edu/mailman/listinfo/sip-implementors
