I feel all of the people have the same voice. But the basic functionality is 
been missed by some people. 

The contact address in INVITE and 200OK form the remote target address, which 
would be used by UAC/UAS to send subsequent requests within the dialog. In fact 
that is the reason why contact address is mandatory in INVITE and 200-INV 
messages...  

Regards,
Nataraju A.B.

-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Rayees Khan
Sent: Fri 7/7/2006 2:33 AM
To: Attila Sipos
Cc: [email protected]
Subject: Re: [Sip-implementors] Multiple Contacts and BYE
 
Hi Atilla,

The nechanism of redirection is used for various purposes like call foreward, 
load balancing etc. In most of the cases that I can think of the contact 
addresses in the 3XX response are different UASs. So if a session is 
established with one of the contacts, which is true in your example, other 
contacts are unaware of this.
If BYE times out after several retries, it effectively means that the contact 
is not reachable. Now if thie BYE is sent to alternate contact, which is not 
aware of the dialog, it is most likely that it would response with a 481 
response.


regards
Rayees


[EMAIL PROTECTED] wrote: -----

To: <[email protected]>
From: "Attila Sipos" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
Date: 07/07/2006 08:02AM
Subject: [Sip-implementors]  Multiple Contacts and BYE

I would like to ask a question about the following scenario...

UserAgent1
----INVITE--------------->
<----------302 with Contact: ;
----ACK--------------->


so it gets redirected...
----INVITE [EMAIL PROTECTED]>
<---------100/180/200---
----ACK--------------------->


Then later it hangs up...

----BYE [EMAIL PROTECTED]>
no response
----BYE [EMAIL PROTECTED]>

after a several retries, UserAgent1 eventually gives up


Now I have some people who believe that since there
is no response, the UserAgent1 should then try
----BYE [EMAIL PROTECTED]>

But I believe that they are wrong.

Who is right?

Regards,

Attila


Attila Sipos
http:/www.vegastream.com



_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors

*****FSS-Private *****" DISCLAIMER: This message is proprietary to Flextronics 
Software Systems Limited (FSS) and is intended solely for the use of the 
individual to whom it is addressed. It may contain  privileged or confidential 
information and should not be circulated or used for any purpose other than for 
what it is intended. If you have received this message in error, please notify 
the originator immediately. If you are not the intended recipient, you are 
notified that you are strictly prohibited from using, copying, altering, or 
disclosing the contents of this message. FSS accepts no responsibility for loss 
or damage arising from the use of the information transmitted by this email 
including damage from virus."
"DISCLAIMER: This message is proprietary to Flextronics Software 
Systems Limited (FSS) and is intended solely for the use of the 
individual to whom it is addressed. It may contain privileged or 
confidential information and should not be circulated or used for 
any purpose other than for what it is intended. If you have received 
this message in error, please notify the originator immediately. 
If you are not the intended recipient, you are notified that you are
strictly prohibited from using, copying, altering, or disclosing
the contents of this message. FSS accepts no responsibility for
loss or damage arising from the use of the information transmitted
by this email including damage from virus."

The information contained in this message may be confidential to Kodiak 
Networks, Inc. and its subsidiaries and protected from disclosure. If this 
message did not reach the intended recipient, or an employee or agent 
responsible for delivering it to the intended recipient, you are hereby 
informed that any distribution or copying of this communication is prohibited. 
If you have received this communication in error, please notify us immediately 
by replying to the sender of the message and then delete the message. Thank you.
_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors

Reply via email to