Hi,
I run the following very basic call after I installed the sipp on my Linux
box ,
SIPp allows to generate one or many SIP calls to one remote system. The tool
is started from the command line. In this example, two SIPp are started in
front of each other to demonstrate SIPp capabilities.
Run sipp with embedded server (uas) scenario:
# ./sipp -sn uas
On the same host, run sipp with embedded client (uac) scenario
# ./sipp -sn uac 127.0.0.1
But the call failed and no calls shown, I got this,
---------------------------- Statistics Screen ------- [1-5]: Change Screen --
Start Time | 2006-11-02 14:32:23
Last Reset Time | 2006-11-02 14:33:07
Current Time | 2006-11-02 14:33:08
-------------------------+---------------------------+--------------------------
Counter Name | Periodic value | Cumulative value
-------------------------+---------------------------+--------------------------
Elapsed Time | 00:00:00:999 | 00:00:45:018
Call Rate | 0.000 cps | 1.333 cps
-------------------------+---------------------------+--------------------------
Incoming call created | 0 | 0
OutGoing call created | 0 | 60
Total Call created | | 60
Current Call | 30 |
-------------------------+---------------------------+--------------------------
Successful call | 0 | 0
Failed call | 0 | 30
-------------------------+---------------------------+--------------------------
Response Time | 00:00:00:000 | 00:00:00:000
Call Length | 00:00:00:000 | 00:00:32:243
----------------- Traffic Paused - Press [p] again to resume
Can you tell me what's wrong with it? How to get a successful call?
Thanks!
---------------------------------
抢注雅虎免费邮箱-3.5G容量，20M附件！
_______________________________________________
Sip-implementors mailing list
Sip-implementors@cs.columbia.edu
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
