Hi All, Can U please Tell me What are the other message Bodies except SDP are supported in SIP......
Santosh On Thu, Feb 14, 2008 at 4:44 PM, Vikas Jayaprakash < [EMAIL PROTECTED]> wrote: > Hi, > > In the case when UE sends a MSRP SEND with Failure-Report Header having > value NO to the Relay, I think response to SEND is mandatory, however in > case of negative response from Term Relay/UE, sending REPORT back to Orig > UE > is not required. > > Can anyone also confirm about the same. > > > > Thanks & Regards, > Vikas Jayaprakash > > On Wed, Feb 13, 2008 at 8:58 PM, Vikram Chhibber < > [EMAIL PROTECTED]> > wrote: > > > "> There will always be a response to SEND request, irrespective of > value > > > of Failure-Report header." > > Sanjay, I am not sure about this statement. Failure-Report: partial > > implies that the sender of MSRP SEND request is not interested in > > successful acknowledgment (200 OK), but it wants reporting of any > > negative response or failure reports in case it ersror happens. This > > way, the sender need not schedule timer for expecting 200 OK. Can > > anyone clarify this? > > > > On Dec 3, 2007 9:13 AM, Sanjay Sinha (sanjsinh) <[EMAIL PROTECTED]> > > wrote: > > > There will always be a response to SEND request, irrespective of value > > > of Failure-Report header. > > > > > > Sanjay > > > > > > > > > ________________________________ > > > > > > From: Vikas Jayaprakash [mailto:[EMAIL PROTECTED] > > > Sent: Friday, November 30, 2007 12:53 AM > > > To: Sanjay Sinha (sanjsinh) > > > Cc: [email protected] > > > Subject: Re: [Sip-implementors] MSRP with Failure-Report > header > > > > > > No/Partial > > > > > > > > > Hi, > > > > > > Please correct me if my understanding is wrong. > > > > > > I will put it this way. What about the transaction response > from > > > Relay back to Orig UE when: > > > > > > 1. When Relay receives an error-free MSRP SEND request with > > > Failure-Report =No. > > > Did you mean Final response is sent back to Orig UE? > > > > > > 2. When Relay receives an error-free MSRP SEND request with > > > Failure-Report =Partial. > > > > > > > > > Thanks & Regards, > > > Vikas Jayaprakash > > > > > > > > > On Nov 30, 2007 2:00 AM, Sanjay Sinha (sanjsinh) > > > <[EMAIL PROTECTED]> wrote: > > > > > > > > > If the Failure-Report header has a value of "no", then > > > the relay should > > > forward SEND request to next hop and send the final > > > response from it > > > upstream. > > > > > > Failure-Report header with value "partial" is treated > > > similar to "yes" > > > in case of error with SEND, ie a REPORT upstream with > > > the error. > > > > > > Sanjay > > > > > > > > > >-----Original Message----- > > > >From: [EMAIL PROTECTED] > > > >[mailto: > [EMAIL PROTECTED] > > > On > > > >Behalf Of Vikas Jayaprakash > > > >Sent: Thursday, November 29, 2007 7:36 AM > > > >To: [email protected] > > > >Subject: [Sip-implementors] MSRP with Failure-Report > > > header No/Partial > > > > > > > >Hi All, > > > > > > > >My doubt is w.r.t MSRP > > > > > > > >RFC 4975/4976 clearly mentions that if Initial valid > > > MSRP SEND > > > >is received at the relay with *Failure-Report = YES*, > > > then the > > > >relay sends back final response to the UE. > > > > > > > >A) *RFC 4976: Section 6.4.1 page 20 says*: > > > > If an incoming SEND request contains a > > > Failure-Report header with a > > > > value of "yes", an MSRP relay that receives that > > > SEND request MUST > > > > respond with a final response immediately. > > > > > > > >However if a valid Initial MSRP SEND request is > > > received by > > > >relay with Failure-Report = Partial or No, then what > > > should Relay do? > > > > > > > >I think we cannot consider that MSRP SEND comes in > with > > > > > > >Failure-Report = YES as default value because > > > > > > > >B) *RFC 4975 : 5.3 page 10 says*: > > > > > > > > The Success-Report header field can have a value > of > > > "yes" > > > >or "no" and > > > > the Failure-Report header field can have a value > of > > > "yes", "no", or > > > > "partial". > > > > > > > >If we logically take into account that if valid > Initial > > > *MSRP > > > >SEND* request is received by relay with > *Failure-Report > > > = > > > >No*, then we need no send any response to it. And in > > > case of > > > >*Partial *do we treat it as *YES *and send back a > final > > > >response to the sender of *MSRP SEND *message? > > > > > > > > > > > >Thanks & Regards, > > > >Vikas Jayaprakash > > > > > > >_______________________________________________ > > > >Sip-implementors mailing list > > > >[email protected] > > > > > > >https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors > > > > > > > > > > > > > > > > > > > > > > -- > > > Thanks & Regards, > > > Vikas Jayaprakash > > > > > > _______________________________________________ > > > Sip-implementors mailing list > > > [email protected] > > > https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors > > > > > > > > > -- > Thanks & Regards, > Vikas Jayaprakash > _______________________________________________ > Sip-implementors mailing list > [email protected] > https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors > _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
