Hi All,
When we tried to make Video call from Polycom to Eyebeam (and vice
versa), video negotiation got failed.
Eyebeam supports H.264(Profile Level Id = 42e015).
Polycom supports H.264(Profile Level Id = 42a014).
As per RFC 3984(Page 38)
****************************************************
If the profile-level-id parameter is used for
capability exchange or session setup procedure,
it indicates the profile that the codec
supports and the highest level
supported for the signaled profile.
****************************************************
Call from Polycom to Eyebeam:
Eyebeam supports Level 2.1(42e015) and it should be able to handle
2.0(42a014) level.But it rejects the Video Offer.
Could any one help us to understand to do SDP Codec negotiation based on
the Profile-Level-Id?
Thanks & Regards,
Sunil kumar
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
for the use of the addressee(s). If you are not the intended recipient, please
notify the sender by e-mail and delete the original message.Global Edge
Software Ltd has taken every reasonable precaution to minimize this risk, but
is not liable for any damage you may sustain as a result of any virus in this
e-mail. You should carry out your own virus checks before opening the e-mail or
attachment. Global Edge Software Ltd reserves the right to monitor and review
the content of all messages sent to or from this e-mail address
_______________________________________________
Sip-implementors mailing list
[email protected]
https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
