Testing will depend upon your customer's and your own expectations as to what services are going to be provided over the SIP trunk. From my experience though, here are a few things to test that commonly cause issues:
1. Verify call hold works on calls from either end. 2. Verify call transfer works on either end. 3. Verify caller ID and caller ID block works in both directions. 4. Verify that DTMF works in both directions. Testing to an IVR is the best way to verify this. 5. Verify various call transfer scenarios work. Whether it is an internal call transfer for an inbound to PBX call being forwarded to a different extension internally, or a hair-pin transfer that goes back out the same trunk a call came in on. 6. Verify calling plans by making inbound/outbound calls for various digit combinations. IE: 411, 911, Long Distance, Local calling &etc. 7. Verify the RTP bearer path works, and can handle simultaneous calls without quality issues. 7. Also do tests for any other call features that you might be making available on the SIP trunk link. Joel Gerber Network Specialist Network Operations Eastlink E: [email protected] T: 519.786.1241 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of satya r Sent: January-28-13 10:44 AM To: [email protected] Subject: [Sip-implementors] plz solve my doubt Hi all, Kindly tell me how to test a sip trunk ? mean after creating a sip trunk what are the feature we have to test that sip trunk is properly working or not ? Regards satya rout _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors _______________________________________________ Sip-implementors mailing list [email protected] https://lists.cs.columbia.edu/cucslists/listinfo/sip-implementors
