Hi Brett, The default value of q-value is 1.
I am not sure when but there was discussion in sip implementers list some time back on this. It takes from HTTP where it is mentioned default is 1 when not specified. HTH, Sreeram -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brett Tate Sent: Wednesday, February 11, 2009 4:00 PM To: SIP Subject: [Sip] rfc3261: default contact q-value Greetings, Within RFC 3261, I was unable to find a default q-value for Contact. Versions 2 through 4 of draft-ietf-sip-rfc2543bis indicated 0.5 as default. It looks like it was unintentionally removed; however I'm not certain. What is the default Contact q-value and where is it documented? Thanks, Brett _______________________________________________ Sip mailing list https://www.ietf.org/mailman/listinfo/sip This list is for NEW development of the core SIP Protocol Use [email protected] for questions on current sip Use [email protected] for new developments on the application of sip _______________________________________________ Sip mailing list https://www.ietf.org/mailman/listinfo/sip This list is for NEW development of the core SIP Protocol Use [email protected] for questions on current sip Use [email protected] for new developments on the application of sip
