You would have 2. One for primary, and one for secondary. For each one of
those, you would use normal RFC 3263 procedures for determining which SRV
record to use.
________________________________
From: [email protected] [mailto:[email protected]] On Behalf Of
Vavilapalli Srikanth-A19563
Sent: Thursday, August 27, 2009 07:57
To: [email protected]
Subject: [Sip] Question on draft-ietf-sip-outbound-20 draft: multiple
flowcreation
Hi
As specified in section 3.3/3.4 of draft-ietf-sip-outbound-20 draft, If
a UA is configured with a outbound-proxy-set with two proxy uris:
"sip:primary.example.com" and "sip:secondary.example.com" And for example,
"sip:primary.example.com" got DNS resolved in to two SRV records "Host1" and
"Host2" and "sip:secondary.example.com" got DNS resolved in to "Host3" and
"Host4", Should UA create four FLOWs, One with each host OR just two FLOWs, one
with each proxy URI(i.e one flow with either Host1 or Host2 and second flow
with Host3 or Host4)?
Please clarify.
Regards
Srikanth
_______________________________________________
Sip mailing list https://www.ietf.org/mailman/listinfo/sip
This list is for NEW development of the core SIP Protocol
Use [email protected] for questions on current sip
Use [email protected] for new developments on the application of sip
