Thanks Peter
Will try your suggestion
b r's
Steve
________________________________
From: Peter Higginson [mailto:[EMAIL PROTECTED]
Sent: Friday, April 27, 2007 6:43 PM
To: Steve Matthews (stmatthe); [email protected]
Subject: RE: [Sipp-users] How to send BYE messages to simulate a BYE
storm.
The simple way (without hacking the code) is to run SIPP once to create
the calls, at whatever cps you need and then exit SIPP. Run it again
with a very high cps just to send the BYE storm.
You have to make sure that the 2nd run uses the same Call-ID values as
the first and you have to be careful of the tag values (or be pre-3261
and leave them out).
If you are testing a device that modifies the tag values both ways (that
you cannot predict) and demands RFC 3261 compliance that will not work,
otherwise it will.
Peter
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve
Matthews (stmatthe)
Sent: 27 April 2007 13:22
To: [email protected]
Subject: [Sipp-users] How to send BYE messages to simulate a BYE storm.
Hi Sipp'ers
I have a requirement to simulate a BYE storm, I used the simple UAC/UAS
scenarios for a couple of thousand calls, I could not work out how using
the existing scripting language I could control sending the BYE's for
these established calls at say 40 cps.
Given there is a way to force the call setup @ variable rates I wondered
if there was simple way of controlling the release rate.
(not currently subscribed to the mailer)
b regards
Steve
________________________________
------------------------------------------------------------------------
---------------------
This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail in
error) please
notify the sender immediately and delete this e-mail. Any unauthorized
copying,
disclosure or distribution of the contents in this e-mail is strictly
forbidden.
------------------------------------------------------------------------
---------------------
Newport Networks Limited is registered in England. Registration number
4067591.
Registered office: 6 St. Andrew Street, London EC4A 3LX
------------------------------------------------------------------------
---------------------
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
