Hi,
I have noticed that if I run UAC with media
Scenario file: uac_pcap.xml
<http://sipp.sourceforge.net/doc/uac_pcap.xml.html> (original XML file
<http://sipp.sourceforge.net/doc/uac_pcap.xml> )
SIPp UAC Remote
|(1) INVITE |
|------------------>|
|(2) 100 (optional) |
|<------------------|
|(3) 180 (optional) |
|<------------------|
|(4) 200 |
|<------------------|
|(5) ACK |
|------------------>|
| |
|(6) RTP send (8s) |
|==================>|
| |
|(7) RFC2833 DIGIT 1|
|==================>|
| |
|(8) BYE |
|------------------>|
|(9) 200 |
|<------------------|
The SIP signaling goes to the address specified in the command sipp -sn
uac_pcap 10.10.30.62 but the RTP traffic goes to the local Loopback
127.0.0.1. Is there an option that will cause the RTP traffic to go to
the IP that traffic uses?
Thanks,
Gary Santia
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
