Hi Tomasz,

Could you turn on more debugging by modifying screen.h and rebuilding
SIPp. You can turn on debugging for specific functional areas by
uncommenting the "screendebuginfo" for the corresponding macros (after
#ifdef FORCE_LOGGING in screen.h). For example:
#define DBGINFO_SCEN(X)       screendebuginfo X
#define DBGINFO_ACT(X)        screendebuginfo X
#define DBGINFO_CALL(X)       screendebuginfo X
#define DBGINFO_CALL_MSG(X)   screendebuginfo X
#define DBGINFO_SOCK(X)       screendebuginfo X
#define DBGINFO_REM(X)        screendebuginfo X
#define DBGINFO_RMT(X)        screendebuginfo X
#define DBGINFO_SIPP(X)       screendebuginfo X

Or just all of them since you are currently debugging your call flow
without putting any load on the system.

You will then get a lot more output in the sipp log files. Could you
send this log file? Also, a network capture could help.

Regards,
-David

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tomasz
Radziszewski
Sent: mercredi 23 avril 2008 13:16
To: [email protected]
Subject: [Sipp-users] IMS bench SIPp: uas ignores message (user
matchingproblem?)

Hi

I am using IMS bench SIPp. My SUT is close to a usual B2BUA.

I've taken the config generated by ims_bench.pl and did the following
changes:
- removed registration phase (my SUT doesn't support registration)
- removed all registration and messaging scenarios, leaving only uac and
uas
- removed route from UAC/UAS scenarios (it was taken from REGISTER
response, 
so I don't have it and I don't need it for my simple system)
- in the users_inf file, changed initial pool from 0 to 2 for all users
(to 
consider them "registered" without runnign the registration scenario).

When the UAC sipp sends INVITE, it goes through my SUT and the SUT sends
it to 
the UAS. However, the UAS doesn't see the INVITE (but it sees recvRMT - 
screen dump below).

I've seen on Wireshark that the INVITEs are really sent to the UAS sipp 
address/port. What can be the cause of ignoring them? Could it be
related to 
the user reservation mechanism? The "From" header after going though my
SUT 
is the same as original "From", except the tag. Can the tag be problem?

SIPp screen dump

                                 Messages  Retrans   Timeout
Unexpected-Msg
 0             [ RECVRMT ]        46
 1             [ SENDRMT ]        46

 2 ----------> INVITE     B5,2    0         0                   0
 3 <---------- 180                0         0
 4 [Poi(5000ms)] Pause            0                             0
..

Original INVITE (SDP truncated):

INVITE sip:[EMAIL PROTECTED] SIP/2.0
Via: SIP/2.0/UDP 172.17.38.205:24272;branch=z9hG4bK-1302-371-4
Max-Forwards: 70
From: "subs017272" <sip:[EMAIL PROTECTED]>;tag=1302SIPpTag00371
To: "subs011163" <sip:[EMAIL PROTECTED]>
Call-ID: [EMAIL PROTECTED]
CSeq: 1 INVITE
Contact: sip:[EMAIL PROTECTED]:24272
Content-Type: application/sdp
Content-Length:  137

v=0
..

Invite forwarded by SUT:

INVITE sip:[EMAIL PROTECTED] SIP/2.0
Via: SIP/2.0/UDP
172.17.38.128:5062;branch=z9hG4bKMvorkJ10-N4QWLfYWkbuoA;rport
Max-Forwards: 70
From: "subs017272" <sip:[EMAIL PROTECTED]>;tag=UPRp9A
To: "subs011163" <sip:[EMAIL PROTECTED]>
Call-ID: L_Zba1vGrsqGV9RkZbjiEg
CSeq: 1 INVITE
Contact: <sip:172.17.38.128:5062;transport=udp>
Content-Type: application/sdp
Content-Length: 137
X-Original-CallID: [EMAIL PROTECTED]

v=0
..

Best regards
-- 
Tomasz Radziszewski
Senior Software Engineer
Ericpol Telecom sp. z o.o.
http://www.ericpol.pl/

------------------------------------------------------------------------
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/j
avaone
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
---------------------------------------------------------------------
Intel Corporation NV/SA
Rond point Schuman 6, B-1040 Brussels
RPM (Bruxelles) 0415.497.718. 
Citibank, Brussels, account 570/1031255/09

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.


-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users

Reply via email to