Hi,
Sipp running the server scenario (both uas and a custom made) does not send
out messages.
The messages.log files show that the messages have been sent, but sipd that
should receive them never does.
Any idea of what is going on or where to look to see what happen to those
messages?
I use the command:
>./sipp -sn uas -trace_err -trace_msg -t un
Thanks,
Anna
Here is the message in the log file. It happens both for the Ringing and for
the 200 OK message:
----------------------------------------------- 2008-06-30 19:04:50:54.945
UDP message sent (467 bytes):
SIP/2.0 180 Ringing^M
Via: SIP/2.0/UDP
204.xxx:5060;branch=z9hG4bK1F1lSAAAAACkSQgAAAAAAE0AAAAAAAAARgHzr5rYvG834tlDn
uuqbw__, SIP/2.0/UDP
204.yyy:5080;branch=z9hG4bK3l1lSAAAAAB5yA4AAAAAANQBAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAA__^M
From: <sip:[EMAIL PROTECTED]:5061>;tag=4022927169^M
To: <sip:[EMAIL PROTECTED]>;tag=16976SIPpTag011^M
Call-ID: [EMAIL PROTECTED]
CSeq: 1 INVITE^M
Contact: <sip:204.xxx:5061;transport=UDP>^M
Content-Length: 0^M
^M
----------------------------------------------- 2008-06-30 19:04:50:55.072
UDP message sent (632 bytes):
SIP/2.0 200 OK^M
...
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
