Hi,No, -i option only works for application level but not IP:
For instance:
Running Sipp with "-bind_local -i 10.0.1.5 -p 5060 10.0.1.1:5060 -t t1" options
(10.0.1.5 exists on my system. As well as 10.0.1.4, see below).
=> Extract of the initial TCP syn packet for Wireshark:
Internet Protocol, Src: 10.0.1.4 (10.0.1.4), Dst: 10.0.1.1 (10.0.1.1)
Transmission Control Protocol, Src Port: 59955 (59955), Dst Port: sip (5060),
Seq: 0, Len: 0
Flags: 0x02 (SYN)
=> Extract of the INVITE msg (from Wireshark) running over this TCP session:
Internet Protocol, Src: 10.0.1.4 (10.0.1.4), Dst: 10.0.1.1 (10.0.1.1)
Transmission Control Protocol, Src Port: 59955 (59955), Dst Port: sip (5060),
Seq: 1, Ack: 1, Len: 1259
Session Initiation Protocol
Request-Line: INVITE sip:[EMAIL PROTECTED]:5060;transport=tcp;pt=FT SIP/2.0
Message Header
Via: SIP/2.0/TCP 10.0.1.5:5060;branch=z9hG4bK-17147-1-0;branched=TRUE
But I don't know if it can be considered as a bug...
Anyway, thanks for your help on this issue,
Best regards,
Cyrille
> To: [EMAIL PROTECTED]> CC: [EMAIL PROTECTED];
> [email protected]; [EMAIL PROTECTED]> Subject: RE:
> [Sipp-users] Force source IP & source Port at IP laye> From: [EMAIL
> PROTECTED]> Date: Wed, 30 Jul 2008 12:31:56 -0400> > You should be able to
> use the -i option to SIPp to get the right IP. I'm > not sure if you'll get
> the port right though.> > Charles> > > > > Cyrille OLIVIER <[EMAIL
> PROTECTED]> > 07/30/2008 12:26 PM> > To> Charles P Wright/Watson/[EMAIL
> PROTECTED]> cc> Ricardo Fernandes <[EMAIL PROTECTED]>, >
> <[email protected]>, > <[EMAIL PROTECTED]>> Subject> RE:
> [Sipp-users] Force source IP & source Port at IP laye> > > > > > > Hi,>
> Thanks for your answer.> I don't speak neither about spoofing (it's bad ;-) )
> nor injection file > but I just want to specify *real* (= existing &
> configured) source IP for > my sipp messages.> My problem: on my eth0 device,
> I've got a single 802.1q vlan (mandatory in > my config): vlan431. On it, 2
> virtual interfaces:> 1/ vlan431:1 with IP 10.0.0.1> 2/ vlan431:2 with IP
> 10.0.0.2> > I want to run 2 sipp client instance over TCP (with single
> socket, option > '-t t1' is used) in 2 terminals:> 1/ the first one will be
> launched with IP source 10.0.0.1 and TCP source > port 5060 (so the IP packet
> source field must be 10.0.0.1 and TCP datagram > source field will be 5060)>
> 2/ the second one will be launched with IP source 10.0.0.2 and TCP > source
> port 5060 (so the IP packet source field must be 10.0.0.2 and TCP > datagram
> source field will be 5060)> > Currently, it does not work.> > Best regards,>
> Cyrille> > > To: [EMAIL PROTECTED]> > CC: [EMAIL PROTECTED];
> [email protected]; > [EMAIL PROTECTED]> > Subject: Re:
> [Sipp-users] Force source IP & source Port at IP laye> > From: [EMAIL
> PROTECTED]> > Date: Wed, 30 Jul 2008 11:48:10 -0400> > > > No. If you want to
> "spoof" addresses it would be pretty hard to > > implement. If you just want
> to pick from one of your IP injection files, > > > you could implement it
> without major code changes.> > > > Charles> > > > > > > > > > Cyrille OLIVIER
> <[EMAIL PROTECTED]> > > Sent by: [EMAIL PROTECTED]> > 07/30/2008 10:40 AM> >
> > > To> > Ricardo Fernandes <[EMAIL PROTECTED]>, > >
> <[email protected]>> > cc> > > > Subject> > Re: [Sipp-users]
> Force source IP & source Port at IP laye> > > > > > > > > > > > > > Hi
> Ricardo & all,> > Thanks a lot for your answer.> > I will get the lastest
> version in the trunk source code,> > Unfortunatelly, i need to set the
> *source* IP and port of my sipp > > messages.> > so it leads to the 100$
> question: does the "setsrc" or "setsource" > option > > also exists ?> > :)>
> > > > BR,> > Cyrille> > > > > Date: Wed, 30 Jul 2008 15:31:57 +0100> > >
> From: [EMAIL PROTECTED]> > > To: [EMAIL PROTECTED]> > > Subject: Re:
> [Sipp-users] Force source IP & source Port at IP laye> > > > > > Hello,> > >
> > > > I think you had the same problem as me.> > > You can change the place
> here your sipp messages go to by specifying> > > the host and the port in the
> scenario file like this:> > > <nop>> > > <action>> > > <setdest
> host="112.12.12.12" port="5060" protocol="udp" />> > > </action>> > > <nop>>
> > > > > > This works in sipp with UDP, in TCP i don't know, never tried.> > >
> This will only work with the lastest version in the trunk source code,> > >
> the current binaries in the sourceforge stable version> > > will not
> recognized the setdest keyword.> > > > > > Ps:> > > If you are using windows
> get this version from the snapshots here:> > >
> http://sipp.sourceforge.net/snapshots/sipp-win32-2008-07-18.exe> > > > > >
> Hope it helps> > > Ricardo Fernandes> > > > > > > > > > > > On Wed, Jul 30,
> 2008 at 2:31 PM, Cyrille OLIVIER > <[EMAIL PROTECTED]> > > wrote:> > > > Hi
> all,> > > > I worried a bit about this post ;)> > > > Actually, I don't need
> a very developped answer but just a short > (but > > clear> > > > ;) ) one.>
> > > > Of course, if needed, i can detail more> > > >> > > > Best regards &
> thanks a lot,> > > > Cyrille> > > >> > > > ________________________________>
> > > > From: [EMAIL PROTECTED]> > > > To: [email protected]> >
> > > Date: Thu, 10 Jul 2008 10:13:50 +0000> > > > Subject: [Sipp-users] Force
> source IP & source Port at IP layer> > > >> > > >> > > > Dear sipp-users,> >
> > >> > > > Again, I asked my requests about SIPp client using TCP:> > > > Is
> it possible to force sipp to use specific IP source & Port > source, > > at
> IP> > > > layer, for "send" messages when TCP with single socket (option '-t
> > t1' > > used)> > > > ?> > > > I tried many things:> > > >> > > > 1/
> -bind_local: seems unuseful.> > > > 2/ -i x.x.x.x -p yyyy options: it's only
> for some SIP headers but > not > > for IP> > > > packet header.> > > > 3/
> <send -source_ip="x.x.x.x" -source_port="yyyy"> for INVITE > message: > >
> does> > > > not seems to work.> > > > 4/ look for this subject in mailing
> list archives: some conversation > > > are> > > > closed to my question but
> not similar at 100%> > > > ...> > > >> > > > Currently, I don't know which
> other workaround or things to do :(> > > > I would really appreciate any help
> about that> > > > Thanks a lot,> > > > BR,> > > > Cyrille> > > >
> ________________________________> > > > Discutez gratuitement avec vos amis
> en vidéo ! Téléchargez > Messenger, > > c'est> > > > gratuit !> > > >
> ________________________________> > > > Avec Windows Live Messenger restez en
> contact avec tous vos amis !> > > > Téléchargez Messenger, c'est gratuit !> >
> > > > > >
> -------------------------------------------------------------------------> >
> > > This SF.Net email is sponsored by the Moblin Your Move Developer's > >
> challenge> > > > Build the coolest Linux based applications with Moblin SDK &
> win > great> > > > prizes> > > > Grand prize is a trip for two to an Open
> Source event anywhere in > the > > world> > > >
> http://moblin-contest.org/redirect.php?banner_id=100&url=/> > > >
> _______________________________________________> > > > Sipp-users mailing
> list> > > > [email protected]> > > >
> https://lists.sourceforge.net/lists/listinfo/sipp-users> > > >> > > >> > > >
> > > Consultez vos emails sur votre mobile ! Créez un compte Hotmail, c'est >
> > gratuit !> > >
> -------------------------------------------------------------------------> >
> This SF.Net email is sponsored by the Moblin Your Move Developer's > >
> challenge> > Build the coolest Linux based applications with Moblin SDK & win
> great > > prizes> > Grand prize is a trip for two to an Open Source event
> anywhere in the > > world> >
> http://moblin-contest.org/redirect.php?banner_id=100&url=/> >
> _______________________________________________> > Sipp-users mailing list> >
> [email protected]> >
> https://lists.sourceforge.net/lists/listinfo/sipp-users> > > > > > > Discutez
> sur Messenger où que vous soyez ! Mettez Messenger sur votre > mobile !>
_________________________________________________________________
Plus besoin de clé usb ! Stockez votre musique en ligne gratuitement !
http://www.windowslive.fr/skydrive/-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
