Hi everyone,
I am doing a simple test, I interconnected 2 Windows XP clients through a
crossover cable, recompiled SIPp with PCAP support using Cygwin, and run the
following commands:
On client 1: sipp -sf g711a_pcap.xml users 2 192.168.0.2
On client 2: sipp -sn uas
Everything works fine when I use 2 Windows XP clients, RTP packets are
transmitted and can calculate jitter, delay...
-> However I have a problem when I run the above commands on 2 Mandriva Spring
2008 clients (using the same .xml and .pcap files as with the WinXP clients)
still interconnected through a crossover cable and compiled using "make
pcapplay". Basically I cannot see any RTP packets going through (so cannot
calculate jitter...), has anyone had this issue before? I do not understand why
I do not see any issue with the Windows base clients...
Did a final test, a WinXP client connected to a Mandriva client, here again no
RTP traffic. As soon as I involve a Linux client I do not get the RTP traffic.
Note: I use the latest SIPp build for both Windows and Linux.
Thanks if anyone can help,
Antoine
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
