Hi,
Im trying to update from SIPp 2.0.1. At this moment Im using trunk
version 556.
Everything is working fine if starting sipp with a call rate larger than
zero, e.g. "-r 32". If starting with "-r 0", or adjusting the call-rate
down to zero maually, it is not possible to execute any traffic again.
When pressinf "*" or "+" the indicated "Call-rate(lengt)" increase but
"new calls during XXX s period" is always zero.
Part of screen dump:
------------------------------ Scenario Screen -------- [1-9]: Change
Screen --
Timestamp: Mon Dec 8 09:08:06 2008
Call-rate(length) Port Total-time Total-calls Remote-host
1.0(0 ms)/1.000s 5063 333.45 s 0
130.100.209.152:5083(TCP)
0 new calls during 0.762 s period 5 ms scheduler resolution
0 calls (limit 36920) Peak was 0 calls, after 0 s
0 Running, 4 Paused, 2 Woken up
0 dead call msg (discarded) 0 out-of-call msg (discarded)
4 open sockets
.
.
.
Is this something you know about?
Let me know if you need any tracings, please tell me how to get those?
Best Regards
Andreas Johansson
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
