Hello,
I'm trying to run a modified version of the default uas scenario to
return a list of response code from an external .csv file
For example to do this
----------> INVITE
<---------- 100 trying
<---------- 486 Busy
with "486" and "Busy" values read from a c.csv file.
However the command " C:\Program Files\Sipp_3.1>sipp -inf
error-codes.csv -sf uas-codes.xml "
gives me the following error : 2009-07-13 13:35:29:483
1247488529.483973: Response codes must be in the range of 100-700.
Here are the corresponding files
==== error-codes.csv =====
SEQUENTIAL
486;Busy
======================
================== uas-codes.xml snip ===================
<send>
<![CDATA[
SIP/2.0 [field0] [field1]
[last_Via:]
[last_From:]
[last_To:];tag=[pid]SIPpTag01[call_number]
[last_Call-ID:]
[last_CSeq:]
Contact: <sip:[local_ip]:[local_port];transport=[transport]>
Content-Length: 0
]]>
</send>
=======================================================
Can you help?
TIA,
Stephane.
<?xml version="1.0" encoding="ISO-8859-1" ?> <!DOCTYPE scenario SYSTEM "sipp.dtd">
<!-- This program is free software; you can redistribute it and/or -->
<!-- modify it under the terms of the GNU General Public License as -->
<!-- published by the Free Software Foundation; either version 2 of the -->
<!-- License, or (at your option) any later version. -->
<!-- -->
<!-- This program is distributed in the hope that it will be useful, -->
<!-- but WITHOUT ANY WARRANTY; without even the implied warranty of -->
<!-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -->
<!-- GNU General Public License for more details. -->
<!-- -->
<!-- You should have received a copy of the GNU General Public License -->
<!-- along with this program; if not, write to the -->
<!-- Free Software Foundation, Inc., -->
<!-- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -->
<!-- -->
<!-- Sipp default 'uas' scenario. -->
<!-- -->
<scenario name="Basic UAS responder">
<!-- By adding rrs="true" (Record Route Sets), the route sets -->
<!-- are saved and used for following messages sent. Useful to test -->
<!-- against stateful SIP proxies/B2BUAs. -->
<recv request="INVITE" crlf="true">
</recv>
<!-- The '[last_*]' keyword is replaced automatically by the -->
<!-- specified header if it was present in the last message received -->
<!-- (except if it was a retransmission). If the header was not -->
<!-- present or if no message has been received, the '[last_*]' -->
<!-- keyword is discarded, and all bytes until the end of the line -->
<!-- are also discarded. -->
<!-- -->
<!-- If the specified header was present several times in the -->
<!-- message, all occurences are concatenated (CRLF seperated) -->
<!-- to be used in place of the '[last_*]' keyword. -->
<send>
<![CDATA[
SIP/2.0 100 Trying
[last_Via:]
[last_From:]
[last_To:];tag=[pid]SIPpTag01[call_number]
[last_Call-ID:]
[last_CSeq:]
Contact: <sip:[local_ip]:[local_port];transport=[transport]>
Content-Length: 0
]]>
</send>
<send>
<![CDATA[
SIP/2.0 [field0] [field1]
[last_Via:]
[last_From:]
[last_To:];tag=[pid]SIPpTag01[call_number]
[last_Call-ID:]
[last_CSeq:]
Contact: <sip:[local_ip]:[local_port];transport=[transport]>
Content-Length: 0
]]>
</send>
<recv request="ACK"
optional="true"
rtd="true"
crlf="true">
</recv>
<recv request="BYE">
</recv>
<!-- Keep the call open for a while in case the 200 is lost to be -->
<!-- able to retransmit it if we receive the BYE again. -->
<timewait milliseconds="4000"/>
<!-- definition of the response time repartition table (unit is ms) -->
<ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200"/>
<!-- definition of the call length repartition table (unit is ms) -->
<CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000"/>
</scenario>
error-codes.csv
Description: error-codes.csv
------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge
_______________________________________________ Sipp-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sipp-users
