Hi Praveen,
Good observation:
Here is the information related to this problem:
http://osdir.com/ml/telephony.sipp.user/2008-07/msg00068.html
<http://osdir.com/ml/telephony.sipp.user/2008-07/msg00068.html>I am not
familiar with GRUU.
Thanks & Regards,
Shridhar.
On Wed, Jul 29, 2009 at 10:04 AM, Praveen Raj Swaminathan <
[email protected]> wrote:
> Thanks Shridhar,
>
>
>
> 1) I have been added the line [authentication Digest] in the second
> REGISTER message. SIPP will attach *qop=auth_int, auth* along with the
> second REGISTER. It causes the issue. So we made code changes in auth.c
> and sending *qop=auth* only, now it is getting 200 OK. It means IMS server
> is not accepting the *qop* field containing two values. Can you clarify
> whether this is a bug in SIPP?
>
>
>
> 2) I am checking whether *gruu (Globally Routable UA URI)* is supporting.
> I have been added the line *Supported: gruu *in the second REGISTER
> message and I am not getting public id and temp id in the 200 OK contact
> header. Do I need to update Open IMS server to the latest version? Can you
> help me in this?
>
>
>
> Regards,
>
> Praveen Raj Swaminathan
> ------------------------------
>
> *From:* Shridhar KS [mailto:[email protected]]
> *Sent:* Tuesday, July 28, 2009 7:55 PM
> *To:* Praveen Raj Swaminathan
> *Cc:* [email protected]
> *Subject:* Re: [Sipp-users] Firewall Disabling
>
>
>
> Hi Praveen,
>
>
>
> That may be because your authorization credentials may not be satisfying
> the server requirement.
>
> Try sending the authorization credentials you are getting in 401. You can
> do that by adding the following line in your second REGISTER message you
> will be sending after receiving 401.
>
>
>
> [authentication Digest]
>
>
>
> Also, I am not sure if you are saying firewall as NAT or something else
> with some access list.
>
> But NAT has nothing to do with SIP unless it is an application level
> gateway(ALG) also. Normally if you have a simple NAT in between your IMS
> and SIPp, and is not able to open a pin hole, you will not receive 401 also.
>
>
>
> Also please check if your IMS is using any authentication server like
> Radius or Diameter and it has configured with appropriate user name and
> password.
>
>
>
> Thanks & Regards,
>
> Shridhar.
>
> On Mon, Jul 27, 2009 at 2:57 PM, Praveen Raj Swaminathan <
> [email protected]> wrote:
>
> Hi,
>
>
>
> I am using SIPp and Open IMS, both are running in linux machine. SIPp
> client is not receiving 200 OK for registration message, keep on getting 401
> message, authorization info attached in REGISTER message. I hope some
> firewall will be running in SIPp machine. May I know how to disable it for
> SIPp specific.
>
>
>
>
>
> Thanks in advance.
>
>
>
> Pravswam
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Sipp-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sipp-users
>
>
>
> **************** CAUTION - Disclaimer *****************
> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely
> for the use of the addressee(s). If you are not the intended recipient, please
> notify the sender by e-mail and delete the original message. Further, you are
> not
> to copy, disclose, or distribute this e-mail or its contents to any other
> person and
> any such actions are unlawful. This e-mail may contain viruses. Infosys has
> taken
> every reasonable precaution to minimize this risk, but is not liable for any
> damage
> you may sustain as a result of any virus in this e-mail. You should carry out
> your
> own virus checks before opening the e-mail or attachment. Infosys reserves the
> right to monitor and review the content of all messages sent to or from this
> e-mail
> address. Messages sent to or from this e-mail address may be stored on the
> Infosys e-mail system.
> ***INFOSYS******** End of Disclaimer ********INFOSYS***
>
>
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
