Hi, Your patch looks wonderful, but the results so far are not completely to my satisfaction. Today I fetched the latest sipp from svn, applied your patch, and built it. There were a few complaints about conversion from pointer to integer of a different size, but I ignored them for the time being. When running it, the call was properly setup, but after a second sipp terminated with a segmentation failt.
I figured the code wasn't prepared to run on 64-bit systems, so I added the line MFLAGS_x86_64=-m32 to the Makefile to build as a 32-bit binary, and now it built with no warnings at all. Despite this, sipp terminated with a segmentation fault in the same spot as it previously did. Since I wanted to determine how far I actually got, I checked the logs on the receiving side. The call was properly setup, and two DTMF digits were received before the call terminated. This is where I am right now. Since this would be a pretty useful feature to us, I'm going to look into it further later today. If you have any suggestions or ideas on how to fix this, you are more than welcome to help. Regards Ingemar On 2011-09-16 20:16, Dmitry Kunilov wrote: > This is possible with my DTMF patch. See > http://sourceforge.net/tracker/?func=detail&aid=3175395&group_id=104305&atid > =637566 > > -----Original Message----- > From: Ingemar Nilsson [mailto:ingemar.nils...@confy.se] > Sent: Friday, September 16, 2011 6:09 PM > To: sipp-users@lists.sourceforge.net > Subject: [Sipp-users] Play PCAP file depending on values from injection file > > Hi, > > I'm trying to send DTMF digits using RTP according to a CSV injection file, > but I don't understand how to get it right. First, I tried this: > > <nop> > <action> > <exec play_pcap_audio="/usr/share/sipp/pcap/dtmf_2833_[field4].pcap"/> > </action> > </nop> > > But SIPp claims it cannot find the file > "/usr/share/sipp/pcap/dtmf_2833_[field4].pcap", because it did not expand > [field4] from the injection file. I read some thread on sipp-users from 2007 > that said that you should assign the value to a variable first, like this: > > <nop> > <action> > <assignstr assign_to="2" value="[field4]" /> <exec > play_pcap_audio="/usr/share/sipp/pcap/dtmf_2833_$2.pcap"/> > </action> > </nop> > > But that didn't work either, since $2 was not expanded to the value of > [field4] in pcap_play_audio. > > Is there any way to do this? I have a working scenario that uses SIP INFO > and reads DTMF digits from an injection file, and I also have a working > scenario with a hard-coded pcap_play_audio sequence. But I would like the > pcap_play_audio sequence to be determined by the injection file, just like > in my SIP INFO scenario, and I cannot figure out how to do that. > > I'm using SIPp 3.1.9 (from the EPEL repo) on CentOS 5. > > Regards > Ingemar > > > ---------------------------------------------------------------------------- > -- > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > http://p.sf.net/sfu/rim-devcon-copy2 > _______________________________________________ > Sipp-users mailing list > Sipp-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sipp-users > ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA Learn about the latest advances in developing for the BlackBerry® mobile platform with sessions, labs & more. See new tools and technologies. Register for BlackBerry® DevCon today! http://p.sf.net/sfu/rim-devcon-copy1 _______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
