> Date: Sun, 16 Feb 2014 20:08:02 -0600
> From:
carlo.carr...@alcatel-lucent.com
> To:
sipp-users@lists.sourceforge.net
> Subject: [Sipp-users] Cannot start a script with more
than 1000 reg/sec
>
> Hello,
> I'm running sipp v3.4.0-RTPSTREAM.
> I found that I am not able to start a registration
script when the
> registration rate is greater than 1000 reg/sec. I'm
using options -r
> 1047 -rp 1000.
> If the registration rate is less than or equal 1000,
the script works
> fine. Otherwise, it starts but does not generate any
load.
>
> Here is a screenshot for a working case:
>
> ------------------------------ Scenario Screen --------
[1-9]: Change
> Screen --
> Call-rate(length) Port Total-time Total-calls
Remote-host
> 1000.0(0 ms)/1.000s 5500 6.00 s 5982
135.1.216.65:5060(UDP)
>
> 998 new calls during 1.001 s period 0 ms scheduler
resolution
> 0 calls (limit 3000) Peak was 5 calls, after 0 s
> 0 Running, 5983 Paused, 473 Woken up
> 0 dead call msg (discarded) 0 out-of-call msg
(discarded)
> 3 open sockets
>
> Messages Retrans Timeout Unexpected-Msg
> REGISTER ----------> 5982 0 0
> 200 <---------- E-RTD1 5982 0 0 0
> ------ [+|-|*|/]: Adjust rate ---- [q]: Soft exit ----
[p]: Pause
> traffic -----
>
>
> And here is a screenshot for a non-working case:
>
> ------------------------------ Scenario Screen --------
[1-9]: Change
> Screen --
> Call-rate(length) Port Total-time Total-calls
Remote-host
> 1047.0(0 ms)/1.000s 5500 2.00 s 0
135.1.216.65:5060(UDP)
>
> 0 new calls during 1.002 s period 1 ms scheduler
resolution
> 0 calls (limit 3141) Peak was 0 calls, after 0 s
> 0 Running, 2 Paused, 3 Woken up
> 0 dead call msg (discarded) 0 out-of-call msg
(discarded)
> 3 open sockets
>
> Messages Retrans Timeout Unexpected-Msg
> REGISTER ----------> 0 0 0
> 200 <---------- E-RTD1 0 0 0 0
> ------ [+|-|*|/]: Adjust rate ---- [q]: Soft exit ----
[p]: Pause
> traffic -----
>
>
> Note that if I start the script with less than 1000
reg/sec and then I
> increase them manually, everything works just fine.
> Here is a screen shot showing that:
>
> ------------------------------ Scenario Screen --------
[1-9]: Change
> Screen --
> Call-rate(length) Port Total-time Total-calls
Remote-host
> 1030.0(0 ms)/1.000s 5500 10.01 s 10208
135.1.216.65:5060(UDP)
>
> 1033 new calls during 1.002 s period 0 ms scheduler
resolution
> 0 calls (limit 3090) Peak was 5 calls, after 2 s
> 0 Running, 10209 Paused, 481 Woken up
> 0 dead call msg (discarded) 0 out-of-call msg
(discarded)
> 3 open sockets
>
> Messages Retrans Timeout Unexpected-Msg
> REGISTER ----------> 10208 0 0
> 200 <---------- E-RTD1 10208 0 0 0
> ------ [+|-|*|/]: Adjust rate ---- [q]: Soft exit ----
[p]: Pause
> traffic -----
>
>
> So, it seems that sipp is capable of handling a rate
greater than 1000,
> but not if starting the script with that value.
>
> I need to start several scripts like this from a shell
script, for lab
> automation registration and call load testing. Is there
a way to
> overcome this limitation?
>
> Thanks in advance for any help you can give,
>
> Carlo
>
>
------------------------------------------------------------------------------
> Android apps run on BlackBerry 10
> Introducing the new BlackBerry 10.2.1 Runtime for
Android apps.
> Now with support for Jelly Bean, Bluetooth, Mapview and
more.
> Get your Android app in front of a whole new audience.
Start now.
>
http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
> _______________________________________________
> Sipp-users mailing list
>
Sipp-users@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/sipp-users
