Hi Rob,
I tried your suggestion of inputting the "./sipp -sn uac -i (My
computer's IP address) (Kamailio's IP address) -trace_err". SIPP is
recognizing the Kamailio server but it fails after sending the Invite
100 message. It gave this message, 2: Aborting call on unexpected
message for Call-Id '[email protected]': while ex 'ecting '100' (index
1), received 'SIP/2.0 404 Not Found. I've considered that i may need to
run on a different integrated scenario and that the error could come
from Kamailio not authorizing the call due to me not providing further
account information. However, if it was this case, I believe I would
have received a 401 (Unauthorized) or a 407 (Proxy Authentication
Required). If you have any ideas, please let me know. Below is the
attempted call.
Thankfully, David Munzer
$ ./sipp -sn uac -i (My computer's IP address) (Kamailio's IP address)
-trace_err
Warning: open file limit > FD_SETSIZE; limiting max. # of open files to
FD_SETSI
ZE = 64
Resolving remote host '10.0.0.160'... Done.
------------------------------ Scenario Screen -------- [1-9]: Change
Screen --
Call-rate(length) Port Total-time Total-calls Remote-host
10.0(0 ms)/1.000s 5060 10.60 s 106
10.0.0.160:5060(UDP)
0 new calls during 0.000 s period 0 ms scheduler resolution
0 calls (limit 30) Peak was 1 calls, after 0 s
0 Running, 109 Paused, 0 Woken up
0 dead call msg (discarded) 0 out-of-call msg (discarded)
1 open sockets
Messages Retrans Timeout
Unexpected-Msg
INVITE ----------> 106 0 0
100 <---------- 0 0 0 106
180 <---------- 0 0 0 0
183 <---------- 0 0 0 0
200 <---------- E-RTD1 0 0 0 0
ACK ----------> 0 0
Pause [ 0ms] 0 0
BYE ----------> 0 0 0
200 <---------- 0 0 0 0
------------------------------ Test Terminated
--------------------------------
----------------------------- Statistics Screen ------- [1-9]: Change
Screen --
Start Time | 2014-04-05 02:20:42:441
1396678842.441802
Last Reset Time | 2014-04-05 02:20:53:081
1396678853.081802
Current Time | 2014-04-05 02:20:53:082
1396678853.082802
-------------------------+---------------------------+--------------------------
Counter Name | Periodic value | Cumulative value
-------------------------+---------------------------+--------------------------
Elapsed Time | 00:00:00:001 | 00:00:10:641
Call Rate | 0.000 cps | 9.961 cps
-------------------------+---------------------------+--------------------------
Incoming call created | 0 | 0
OutGoing call created | 0 | 106
Total Call created | | 106
Current Call | 0 |
-------------------------+---------------------------+--------------------------
Successful call | 0 | 0
Failed call | 0 | 106
-------------------------+---------------------------+--------------------------
Response Time 1 | 00:00:00:000 | 00:00:00:000
Call Length | 00:00:00:000 | 00:00:00:004
------------------------------ Test Terminated
--------------------------------
2014-04-05 02:20:53:077 1396678853.077802: Aborting call on
unexpected m
essage for Call-Id
'[email protected]': while expecting '100' (index 1), recei
ved 'SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 10.0.0.210:5060;branch=z9hG4bK-3288-106-0;rport=5060
From: sipp <sip:[email protected]:5060>;tag=3288SIPpTag00106
To: sut
<sip:[email protected]:5060>;tag=fc4b70b0517cb156b1fb39a76698f743-5763
Call-ID: [email protected]
CSeq: 1 INVITE
Server: kamailio (4.0.4 (i386/linux))
Content-Length: 0
'.
sipp: There were more errors, see 'uac_3288_errors.log' file
-----Original Message-----
From: Rob Day <[email protected]>
To: davidjmunzer <[email protected]>
Cc: sipp-users <[email protected]>
Sent: Wed, Apr 2, 2014 2:24 pm
Subject: Re: [Sipp-users] Connecting phone system to SIPp
David,
I think that is the wrong syntax - if you have Kamailio's IP address
after the -i, SIPp will try to bind that IP address (which it doesn't
own) and fail. You need "./sipp -sn uac -i <your local network IP
address> <Kamailio machine IP address>"
Note that you need to use the IP address that can talk to your network
(the one which Kamailio is on, probably 192.168.x.x), not 127.0.0.1
(which is localhost-only).
Best,
Rob
On 2 April 2014 20:22, <[email protected]> wrote:
> Hi Rob,
>
> I tried doing that by imputing ./sipp -sn uac 127.0.0.1 -i IP dress,
> It
> responds with the error message, 1396509142.105827: Unable to bind
> main
> socket, errno = 125 (Cannot assign requested address). Is there an
> issue
> with my syntax, since I don't see why SIPP shouldn't be able to
> access
> Kamailio's IP address.
>
> Thankfully
> David
>
>
>
>
> -----Original Message-----
> From: Rob Day <[email protected]>
> To: davidjmunzer <[email protected]>
> Cc: sipp-users <[email protected]>
> Sent: Wed, Apr 2, 2014 12:54 pm
> Subject: Re: [Sipp-users] Connecting phone system to SIPp
>
> Hi David,
>
> I think this may be because your Windows machine provides its IPv6 or
> its localhost address first, so SIPp uses that and is then unable to
> send messages to other IPv4 machines on the network. If you
> explicitly
> specify an IP address to bind to (with the -i option) you should get
> better results.
>
> Best,
> Rob
>
> On 2 April 2014 19:18, <[email protected]> wrote:
>> The SIP server that I am using is Kamailio.
>>
>>
>> -----Original Message-----
>> From: Rob Day <[email protected]>
>> To: Munzer,David J <[email protected]>
>> Cc: sipp-users <[email protected]>
>> Sent: Wed, Mar 26, 2014 1:14 pm
>> Subject: Re: [Sipp-users] Connecting phone system to SIPp
>>
>> Rob,
>>
>> By phone system, I do mean SIP server, specifically a combination of
>> Kamailio and Freeswitch. When I try running the program using
>> "./sipp -sn
>> uac the ip address", It informs me that it's unable to send UDP
>> message:
>> Bad address. I've checked that the SIP server's address is correct
>> by
>> doing
>> ip add on the SIP server to verify the IP address. Any ideas how to
>> approach this issue?
>>
>> Thankfully,
>> David
>>
>> David,
>>
>> When you say that you have a phone system running, do you mean that
>> you have a SIP server (Kamailio/Clearwater/Asterisk) running, or
>> something else?
>>
>> If you have a SIP server, it is probably listening on port 5060
>> (though you can check by running `netstat -lnp`) and you can just
>> give
>> the IP address of that machine as a command-line argument to SIPp.
>> I'm
>> assuming you want to use SIPp in UAC mode to test this phone system
>> -
>> if you want SIPp in UAS mode, handling calls sent to it by that SIP
>> server, you'll need to check the documentation of that SIP server to
>> find how to configure it.
>>
>> SIPp only communicates through the SIP protocol, so if by 'phone
>> system' you don't mean a SIP server, you'll have to set one up to
>> translate between SIP and whatever phone system you have.
>>
>> Best,
>> Rob
>>
>> On 25 March 2014 19:14, Munzer,David J <[email protected]> wrote:
>>> Hi,
>>>
>>> I have just finished installing SIPp and am not sure how to connect
>>> my
>>> phone system to SIPp. My computer is running the program on Windows
>>> 7
>>> through Cygwin. My phone system runs on Alpine Linuz through a USB.
>>> Because of the two different operating systems, I need need to
>>> connect
>>> the two most likely through the IP address. However, I am unsure
>>> how to
>>> go about this. I would really appreciate help on this matter.
>>>
>>> Thankfully,
>>> David
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Learn Graph Databases - Download FREE O'Reilly Book
>>> "Graph Databases" is the definitive new guide to graph databases
>>> and
>>> their
>>> applications. Written by three acclaimed leaders in the field,
>>> this first edition is now available. Download your free book today!
>>> http://p.sf.net/sfu/13534_NeoTech
>>> _______________________________________________
>>> Sipp-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/sipp-users
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>>
>> _______________________________________________
>> Sipp-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/sipp-users
>>
>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Sipp-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/sipp-users
>
------------------------------------------------------------------------------
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration
Continuously Automate Build, Test & Deployment
Start a new project now. Try Jenkins in the cloud.
http://p.sf.net/sfu/13600_Cloudbees
_______________________________________________
Sipp-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sipp-users
