Hello,
Hope this email does not bothering you too much!
I'm using IMS bench sipp to test OpenIMSCore, and I need some help.
Every time I run sipp to connect to manager, the sipp run as Server Mode.
*My question is: how could I run some sipp instance as Server mode, while
other as Client mode? where to configure this?*
------------------------------------------------------------
1- -0- Scenario Screen - [1-9]: Change Screen - 5057
Port Total-time Total-calls Transport
5060 1.00 s 0 UDP
0 new calls during 1.001 s period 1 ms scheduler resolution
0 calls Peak was 0 calls, after 0 s
0 Running, 0 Paused, 0 Woken up, 0 Sync
0 open sockets
Messages Retrans Timeout
Unexpected-Msg
------------------------------ Sipp Server Mode
-------------------------------
The startup scripts(run_1.sh) I used as below:
export LD_LIBRARY_PATH=/usr/local/lib:${LD_LIBRARY_PATH}
./sipp -id 1 -i 172.16.10.236 -user_inf ./ims_users_1.inf -rmctrl
172.16.10.237:5000 172.16.10.34:4060 -trace_err -trace_cpumem -trace_scen
-trace_retrans $*
I used *ims_bench.pl <http://ims_bench.pl>* to configure and generated
related scenarios and configuration.
-----
Regards,
Gary Wu
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
