Sushma, Thanks for your reply.
pcap is 2 minutes long and from what i see UAS looks to be working properly as when i make calls from softphone it stays for long duration. I think there is issue in UAC but i am not able to identify what the issue is and where to look. Thanks, On Thu, Nov 6, 2014 at 11:22 PM, Sushma Kattinti < sushma.katti...@vonagebusiness.com> wrote: > Hi Vince, > > Check how long your pcap is. If you want it to be long then have a 2 to > 3 min pcap and accordingly change the pause time in your scenario > > If you want to limit your calls then use this call rate options > > See below: > > *** Call rate options: > > -r : Set the call rate (in calls per seconds). This value > can bechanged during > test by pressing '+','_','*' or '/'. Default is 10. > pressing '+' key to increase call rate by 1 * > rate_scale, > pressing '-' key to decrease call rate by 1 * > rate_scale, > pressing '*' key to increase call rate by 10 * > rate_scale, > pressing '/' key to decrease call rate by 10 * > rate_scale. > > -rp : Specify the rate period for the call rate. Default is > 1 second and default > unit is milliseconds. This allows you to have n calls > every m milliseconds > (by using -r n -rp m). > Example: -r 7 -rp 2000 ==> 7 calls every 2 seconds. > -r 10 -rp 5s => 10 calls every 5 seconds. > -rate_scale : Control the units for the '+', '-', '*', and '/' keys. > -rate_increase : Specify the rate increase every -fd units (default is > seconds). This allows > you to increase the load for each independent logging > period. > Example: -rate_increase 10 -fd 10s > ==> increase calls by 10 every 10 seconds. > -rate_max : If -rate_increase is set, then quit after the rate > reaches this value. > Example: -rate_increase 10 -rate_max 100 > ==> increase calls by 10 until 100 cps is hit. > -no_rate_quit : If -rate_increase is set, do not quit after the rate > reaches -rate_max. > -l : Set the maximum number of simultaneous calls. Once this > limit is reached, > traffic is decreased until the number of open calls > goes down. Default: > (3 * call_duration (s) * rate). > -m : Stop the test and exit when 'calls' calls are processed > -users : Instead of starting calls at a fixed rate, begin > 'users' calls at startup, > and keep the number of calls constant. > > > Hope it Helps. > > > Sushma > > > From: Linux Vince <lin...@gmail.com> > Date: Thursday, November 6, 2014 at 10:43 AM > To: sipp-users <sipp-users@lists.sourceforge.net> > Subject: [Sipp-users] SIPP UAC With Media > > I am able to send media both ways i.e. using UAC and UAS both. > > However call disconnects exactly after 21 seconds. > > I am testing it as below > > SIPP UAC -----> SBC Kamailio with rtpproxy ------> SIPP UAS > > Also i specified only one call length in UAC i.e. "-l 1" but it still > generates more than one concurrent calls. > > Here is my UAC command > > sipp -sf uac_pcap.xml -d 100000 -s 01191989898 10.0.0.15 -l 1 -mp 5606 > -i 10.0.0.18 > > I am using default XML provided here - > http://sipp.sourceforge.net/doc3.3/uac_pcap.xml > > Here is my UAS command > > sipp -sf uas.xml -p 5060 -i 10.0.0.19 -mi 10.0.0.19 -skip_rlimit > > XML i created using > > sipp -sd uas > uas.xml > > and added below lines > > <recv request="ACK" > rtd="true" > crlf="true"> > </recv> > > <nop> > <action> > <exec play_pcap_audio="g711a.pcap"/> > </action> > </nop> > > <pause milliseconds="8000"/> > > <recv request="BYE"> > </recv> > > Please help. >
------------------------------------------------------------------------------
_______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users
