Hi, the xml can be found in my first post. I am using the g722 pcap that is
provided with sipp. I tried around a bit and after removing the
format-information from the xml it works fine.
The command i am using is:
Sipp -sf raduas.xml -i 192.168.40.1
I tried it out on the client side with:
Sipp -sn uac 192.168.40.1 -d 10000
In my test case it worked just fine now. On monday i will most probably have a
chance to try it out with one of our corporate operator positions on the client
side. I will let you know if it worked well then.
Thanks kai
----- Ursprüngliche Nachricht -----
Von: "Sakharam Thorat" <sakharam.tho...@outlook.com>
Gesendet: 17.04.2015 17:36
An: "Kai Panzinger" <kpanzin...@gmail.com>
Cc: "vkumba...@outlook.com" <vkumba...@outlook.com>; "sipp-users"
<sipp-users@lists.sourceforge.net>
Betreff: RE: [Sipp-users] No valid To: header in reply
please attach .pcap and .xml file also post command you using to run sipp
Best Regards,
Sakharam Thorat.
Date: Fri, 17 Apr 2015 09:56:52 +0200
Subject: Re: [Sipp-users] No valid To: header in reply
From: kpanzin...@gmail.com
To: sakharam.tho...@outlook.com
CC: vkumba...@outlook.com; sipp-users@lists.sourceforge.net
Sorry,
here it is.
2015-04-17 7:24 GMT+02:00 Sakharam Thorat <sakharam.tho...@outlook.com>:
Kai , I think you you missed to attach trace
Best Regards,
Sakharam Thorat.
Date: Thu, 16 Apr 2015 13:53:06 +0200
From: kpanzin...@gmail.com
To: vkumba...@outlook.com
CC: sipp-users@lists.sourceforge.net
Subject: Re: [Sipp-users] No valid To: header in reply
Hi,
here is the trace you asked for.
As far as i can see now the problem results out of the fact that the
format-information of the .xml is transmitted as well.
I think you should also see it when you have a look into the content of the 200
OK. I will let you know if this solves my issue.
Thanks for now,
Kai
2015-04-15 16:24 GMT+02:00 <vkumba...@outlook.com>:
Hi Kai,
Could you please provide sip traces?
Thanks, v.
Sent by Outlook for Android
_____________________________
From:Kai Panzinger
Subject:[Sipp-users] No valid To: header in reply
To:sipp-users@lists.sourceforge.net
Hey Guys,
I am Using sipp to simulate a Radiostation in an IP-Radio Environment.
As such a radio is compliant to the Eurocae standard it has to act like the
following:
---recv---> INVITE //Basestation connects to the radiochannel
<---send--- 200 OK
---recv---> ACK
<--transmition-->
---recv---> BYE //Basestation disconnects from the radiochannel
<---send--- 200 OK
In order to do this i have written an .xml for simulating the (UAS)
radiostation (Script is in appendance).
For testing i am feeding my server with the standard UAC procedure. In final
state i will connect my UAS to the corporate Radio Basestation Equipment my
company developes.
Problem is that the UAC throws the error (in subject) as soon as my UAS replies
with its first 200.
Hope you guys can help me with this matter.
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own
process in accordance with the BPMN 2 standard Learn Process modeling best
practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________ Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
Sipp-users mailing list
Sipp-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sipp-users
