Andrei, For what it's worth, I have seen this type of behavior when there is an issue with the phone sharing an IP network with the phone system, and the two have different gateways, or their VLAN does not directly connect or route to each other. I would also verify the config or the server and the phone to ensure they are both using the correct gateway(s). When the UA and the server are on the same network with different gateways all calls could get stuck in CDR's and none complete properly. Feel free to ignore me though. Tony >>> "Raymond Dans" <[EMAIL PROTECTED]> 11/27/08 9:16 AM >>>
Andrei wrote: >Laurentiu was trying to create some CDR's to test the >jasper-reports patch, but he ran into some problems. Not sure >if this is a bug or not. >He tried to register some phones to sipxconfig, but it didn't >work because it seems that sipregistrar was not starting because of " >Configuration test failed". This is in revision 14099. >But that isn't the problem. > >We have a LG-Nortel phone here which was previously registered >to Laurentiu's server, configured by hand, with user 202. This >user existed on Laurentiu's server and he thought of trying to >make a call. Pressed 200 on the phone keyboard and pressed >"Call". The phone said "Temporary failure". But when he looked >in sipxconfig interface, there was an active call displayed, >from 202 to 200. No phones are showing up in the "Registration" page. >He thought it was just a coincidence, so tried to dial some >other number, a random 4 digit number(5678). Again, the phone >said "Temporary failure", but there was a call from 202 to >5678 in the active calls page. I remembered some e-mail on the >list about active calls showing up after the call had ended, >and the solution: to restart the call resolver. But that >didn't work. After the restart of the call resolver, the same >active calls showed up in there. Tried restarting all the >services, same result. Tried restarting sipx all-together, >same result. >He even restarted the computer, the active calls were still >there. The only thing that made the active calls go away was >reseting the DB. >After reseting the DB, we had no users except superadmin. >So we tried the same thing from the phone, with the same >result: a new active call displayed in the interface, from 202 >to 206. (only this time user 202 did not exist) > >Does anybody know what this is? Anybody else see this? >Is this a bug? Should we open a JIRA? In looking at the logs, the whole system is really not healthy. There are a number of transport errors in the Proxy and I can't really tell much without debugging turned on in the Proxy to see what sort of messages are seen and/or generated. Could you please reproduce with debugging turned on. Thanks Raymond _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
