Alberto, is working for you using the Bria client or the SMC client? >>> Alberto <[email protected]> 06/11/09 12:06 PM >>> Hi Paul, works perfectly with the suggested change. Thanks Alberto
Paul Mossman ha scritto: > Alberto, > > Turns out that "Send Outgoing request directly to target" in the SMC > maps to "use_proxy_for_outbound_calls" in the INI file (with booleans > reversed.) This setting is already available in sipXconfig as "Use > proxy for outbound calls", on the Network screen under the Line. > > So, if you check "Use proxy for outbound calls" in sipXconfig, then > you should find that "Send Outgoing request directly to target" > becomes unchecked in the SMC, and the ITSP call should start working. > Please let us know if it doesn't work. > > I've updated XX-5869 with instructions to change the sipXconfig "Use > proxy for outbound calls" default to checked, and hide it under Advanced. > > I hope that helps! > > > -Paul > [email protected] > > > ------------------------------------------------------------------------ > *From:* [email protected] > [mailto:[email protected]] *On Behalf Of > *Mossman, Paul (CAR:9D30) > *Sent:* June 2, 2009 4:22 PM > *To:* Alberto > *Cc:* [email protected] > *Subject:* Re: [sipX-dev] XX-5623 Closed and new issue recalling a > sip URI ofan incoming sipxbridge call (Bria Pro and call back) > > Alberto, > > Ah I see now. I fully agree with XX-5869 then. > > The CounterPath Bria 2.5 Admin Guide say this setting is typically > off, intended for lab tests and may cause problems in a NAT > environment. > > I think XX-5869 should turn it off period, with no need to even > expose it for admin the the GUI. > > -Paul > [email protected] > > > > ------------------------------------------------------------------------ > *From:* Alberto [mailto:[email protected]] > *Sent:* June 2, 2009 3:50 PM > *To:* Mossman, Paul (CAR:9D30) > *Cc:* Lawrence, Scott (BL60:9D30); [email protected] > *Subject:* Re: [sipX-dev] XX-5623 Closed and new issue > recalling a sip URI of an incoming sipxbridge call (Bria Pro > and call back) > > Paul Mossman ha scritto: >> Scott wrote: >> >>> On Mon, 2009-06-01 at 23:50 +0200, Alberto wrote: >>> >>> >>>> You're very right in this ... and gave the hint to >>>> >>> understand Bria is >>> >>>> not contacting sipXproxy but trying directly the hard way ... >>>> contacting "itspdomain.org" even if does not have an account >>>> configured. I configured Bria via sipxconfig. There is only one >>>> account configured and is not the ITSP account. >>>> >>>> There is actually a switch that will fix this behavior. Set "Send >>>> Outgoing request directly to target" off. I believe this should be >>>> done in the Bria plug-in. >>>> >>> Please submit an issue on that - should be easy to fix. >>> >> >> All calls should go through the proxy, so I don't think we want to >> change the default in the Bria plug-in. >> >> Can you raise an XTRN again the Bria instead? >> >> >> -Paul >> [email protected] >> >> >> > Paul exactly what is not happening. With the above mentioned > switch set to ON calls to "n...@itsp" are not routed through > sipxproxy but directly to ITSP. With the current sipxconfig > Bria plug-in the setting is set to ON or not set. I cannot > really be sure because I could not find such setting in the > file generated from sipxconfig, but maybe I just couldn't spot > it. What I'm sure is: when the setting is OFF all calls are > correctly established. When I close and reopen Bria login > again with a sipx user with the profile provisioned through > sipxconfig the setting will be back again to ON. And again > calls to "n...@itsp" won't be established. > > http://track.sipfoundry.org/browse/XX-5869 > > It's not a Bria issue ... at least to my understanding. > _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
