Scott Lawrence wrote:
On Thu, 2009-06-11 at 13:47 -0700, Chris St Denis wrote:
Scott Lawrence wrote:
On Thu, 2009-06-11 at 11:15 -0700, Chris St Denis wrote:
(resending this because it hasn't gotten a reply, and I see it tagged as
spam so it may have gotten filtered for most people)
I've installed 2 sipx 4.0 servers.
pbx1.smartt.com - master server, fully configured .
pbx3.smartt.com - slave server, joined with sipxecs-setup
However, Job status shows replication is failing. Seems to be SSL
errors, but the sipxecs-setup seems to copy over the certs and keystore
so I don't know why it would have SSL issues.
Is this a bug, or did I miss some important step? I haven't been able to
find any documentation on sipx4 replication (all I can find it 3.x which
seems pretty different) so I'm just going by the info in the sidebar on
the add a server page on the master.
Here are some logs from the master of the failures:
http://pastebin.ca/1453932
What specific build are you using?
Server is running sipXconfig (4.0.0-015321)
It's very likely that your problem is fixed in the 4.0.1 builds. You
can either upgrade to the most recent one in the Developer Builds area
(be careful - you want 4.0.1, not 4.1.0), or wait a bit until we copy
it to the stable area (almost certainly tomorrow, by the way)
Thanks. I'll try a yum update tomorrow and see what happens.
Hopefully that will fix my other problems too -- I've been getting weird
database errors in the log (despite the web interface working fine so
it's not a complete database failure)
==> sipxcallresolver.log <==
"2009-06-11T11:15:16.982670 ":ERR:Loss of connection to database -
retrying to connect after sleep
==> sipxstunnel.log <==
2009.06.11 11:15:16 LOG5[4558:3086637968]: Postgres-1 connected from
127.0.0.1:47880
2009.06.11 11:15:16 LOG3[4558:3086637968]: connect_wait: getsockopt:
Connection refused (111)
2009.06.11 11:15:16 LOG5[4558:3086637968]: Connection reset: 0 bytes
sent to SSL, 0 bytes sent to socket
And the ability of phones to register has stopped working as well
sometime after I added the replication.
[Phone to pbx]
REGISTER sip:pbx1.smartt.com SIP/2.0.
<snip>
[pbx to phone]
SIP/2.0 100 Trying.
<snip>
[pbx to phone]
SIP/2.0 408 Request timeout.
Not sure if these are related to the replication problems, or even to
eachother.
_______________________________________________
sipx-dev mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
sipXecs IP PBX -- http://www.sipfoundry.org/
