On Thu, Aug 13, 2009 at 9:28 AM, Damian Krzeminski<[email protected]> wrote: > chaitra sharma wrote: >> Hi All, >> >> In a SIP trunk gateway, is it mandatory that the domain name / IP >> address entered in the "Address" field on the SIP trunk >> "_Configuration_" (creation) screen and the "ITSP server domain name" >> field on the "_ITSP Account_" screen be exactly the same? >> >> If Yes, can the "ITSP server domain name" field be made non-editable >> once the "Address" and "Route" selected on the SIP Trunk creation screen >> and Apply is clicked? >> (Currently, the "ITSP server domain name" field auto-accepts the value >> entered in the "Address" field on the SIP Trunk creation screen. But >> this field is editable and not validated. Entering a value of "Blank" >> and restarting all the affected services leads to XX-6203 where in the >> SipXproxy gets into 'configuration test failed' state.) >> >> Thanks, >> Chaitra >> > > The "ITSP server domain name" should be hidden (I thought it was hidden at > some point). > The only way to set the ITSP domain name should be address field on the > gateway/SIP Trunk configuration screen screen...
I concur. Ranga > D. > > _______________________________________________ > sipx-dev mailing list [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev > sipXecs IP PBX -- http://www.sipfoundry.org/ > -- M. Ranganathan _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
