Thanks for the reply Paul. Doesn't seem to be the same. I've pulled the port from the Outbound proxy Config, saved file and reset phone. Same issue.
From: Paul Mossman [mailto:[email protected]] Sent: Monday, January 18, 2010 1:23 PM To: Todd Hodgen; [email protected] Subject: RE: [sipX-dev] FW: Polycom 430 doesn't work after update of 4.1.x viasipxconfig Hi Todd, Sounds like http://track.sipfoundry.org/browse/XX-7278 : Polycom does not register when SIP domain != FQDN The work-around is to go into each Polycom Line, and under Registration change the Outbound Proxy Port from "5060" to blank. -Paul _____ From: [email protected] [mailto:[email protected]] On Behalf Of Todd Hodgen Sent: January 18, 2010 4:16 PM To: [email protected] Subject: [sipX-dev] FW: Polycom 430 doesn't work after update of 4.1.x viasipxconfig I had a notice that an update was available on my server running 4.1.x I ran the update from sipxconfig. No issues with the update, and it seemed to finish fine. I have one lingering issue from it though. Calls come in and are answered by the Auto Attendant fine, ITSP trunks seem to be working. A polycom 430 phone that was working fine does not want to register. It was set up with one line for the user, and the second line for a speed dial number with presence. I've done the following - Regenerated profile and started phone. Regenerated server profiles Created sipxmerge file after restarting phone. Only two entries in the merge file - weird - a registration attempt of a speed dial number for that extension with 405 method not allowed response Removed speed dial from that phone Saved Config Rebooted phone Still no registration I've done a dig on my server, and it looks normal, returning what I would expect for an A record. However, I get an error in the log of the Polycom phone itself - 0117225147|sip |4|01|doDnsListLookup(udp): doDnsSrvLookupForARecordList 'mydomain.com' found no records. It appears the Polycom phone is shutting down its SIP Stack. What is weird is this all worked prior to the update, and my soft clients still work, but none of my polycoms. Anyone seen any issues with Polycom with this update? I see one JIRO issue raised, but it appears to be with HA configurations. I'm tempted to re-install from ISO to see if the problem goes away, using the most recent unstable ISO, unless someone needs some specific testing done to try and isolate a potential problem.
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev sipXecs IP PBX -- http://www.sipfoundry.org/
