After digging a bit I found out that 2 choices of Resource list method
exist on soft client. One for the Device and other for the User.
From
the user guide of the soft client, it says that storage that is
configured, under
Contact storage is for the contact list (which contains SIP addresses
and other addresses), while the storage that is configured on each SIP
account is for the buddy list (which contains only
presence/availability information).
Thanks,
Archana
Archana wrote:
Hi All,
Register a user 200 with Avaya 3456 UC client
Navigate to Devices-->Phones and click on newly added phone link
Click on the System link on the left hand side.
System page opens with the parameter 'Resource list method' and
default value set to WebDAV as shown below.
Now navigate to Devices-->Phones-->click on newly added phone link
Under Lines page click on --> Resources link
Lines page opens with the parameter 'Resource list method' and default
value set to Local as shown below.
If I add contacts through admin phonebook or on client(avaya 3456 uc)
all the contacts are getting updated under: /usr/share/www/webdav
directory.
Now my queries are:
1)Why the 2 parameters with same name 'Resource List Method' being used
2) If these parameters are being used for same purpose, then why the
default values are different for both
3) If these parameters are used for different purposes, then where does
the Local being stored ?
Please Advice me,
Thanks,
Archana
_______________________________________________
sipx-dev mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
sipXecs IP PBX -- http://www.sipfoundry.org/
|
_______________________________________________
sipx-dev mailing list [email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-dev
sipXecs IP PBX -- http://www.sipfoundry.org/
