Sent from my Sigma Lambda BetaBerry -----Original Message----- From: "William Russell" <[email protected]> Date: Sat, 11 Dec 2010 15:03:41 To: Tony Graziano<[email protected]> Reply-To: [email protected] Subject: Re: [sipx-dev] Video support in sipXbridge?
Unfortunately, I don't have access to this over the weekend, but I can tell you that I've looked at the traces (through Wireshark) and the point of denial is the bridge. There is NO H.264 RTP media packets leaving the bridge on either endpoint (both identical sipX configurations and phone configurations). The G711 RTP packets pass through with ease, but the H.264 RTP packets sent from the phone are denied by the bridge with a ICMP port unreachable error. I think I've found why there is an error. There is even a bug sent in around June 6th 2010 that states that because of Skype for Sip offering video in 2011 - the bridge must begin to support video. I know where the problem is and as soon as I get to my computer I could tell you exactly what java file causes this occurrence. I do not think this a major change - actually, it's really simple because EVERYTHING else works perfectly (signalling, voice traffic, even bye messages). Sent from my Sigma Lambda BetaBerry -----Original Message----- From: Tony Graziano <[email protected]> Date: Sat, 11 Dec 2010 02:36:00 To: <[email protected]>; sipXecs developer discussions<[email protected]>; <[email protected]> Subject: Re: [sipx-dev] Video support in sipXbridge? A siptrace would be helpful. Can you peovide the call flow information as it relates to the gateway? i.e. Is it going through a pstn or itsp provider? The siptrace would help define what codecs are being offered/accepted. A call using h.264 uses the same media ports as a voice only call. So it could be a gateway or endpoint that is not offering or allowing video. Hence the siptrace. On 12/10/10, William Russell <[email protected]> wrote: > Endpoints: Polycom VVX 1500s > Protocol: H264 > There is only one issue: the port that the media is sent to is NOT being > opened because the bridge is NOT looking for "video" media attributes such > as the port it is being sent to from the phone. > > I looked into the sipXbridge code. There is a point where the bridge is > parsing the SDP for information on the RTP streams - only problem is it is > ONLY looking for audio. Also, another java file states ONLY voice codecs and > NOT any video codecs. > > I just wanted to know if I'm on the right path to solving this problem. We > are developing a unique call manager system and video must be allowed over > the bridge...I think that solving those two problems will fix it. > > If I'm still not making much sense, could someone explain (specifically) how > the bridge (or any other parts of sipxecs) knows WHAT ports to open up for > the audio and video streams? That's the real crux of the matter here - if I > understand all the moving parts, I can figure out how to make it work for > us. > > Thanks for all your help! > Sent from my Sigma Lambda BetaBerry > > -----Original Message----- > From: "Todd Hodgen" <[email protected]> > Sender: [email protected] > Date: Fri, 10 Dec 2010 18:09:33 > To: 'sipXecs developer discussions'<[email protected]> > Reply-To: [email protected], > sipXecs developer discussions <[email protected]> > Subject: Re: [sipx-dev] Video support in sipXbridge? > > SipXecs certainly supports video, as it is just a media stream. You can do > a video call from a Nortel Phone to a Nortel Phone, or to a Counterpath > phone. You can do a counterpath to Polycom as well, using video. > > What I haven't seen explained here is what video you are trying to send. > What are your endpoints exactly, and what protocol are they expecting, and > what are the network requirements? If they are sip based products, then the > question is what ports do they require from end to end? > > You are hard pressed to find many conference systems that use the PSTN for > video, unless it is using ISDN PRI or BRI. And, those ports are bonded > typically to a higher rate than 64k. > > I think a bit more detail of what you are trying to do will shed some light > on what the technical issues are that need to be overcome, if they can be. > > In the mean time, you can use some of the proven products - Polycom VVX1500, > Nortel, and Counterpath. I did see someone playing with Tanberg on here a > few weeks ago as well. > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tony Graziano > Sent: Friday, December 10, 2010 5:27 PM > To: sipXecs developer discussions > Subject: Re: [sipx-dev] Video support in sipXbridge? > > I normally never have a problem with video. > > I never find I can call with video through a itsp. I normally have to > make a sip-to-sip call or setup a site-ti-site dialing plan. > > Have you tried to do a sip-to-sip call or site dialing planv > > On 12/10/10, W. E. W. Russell <[email protected]> wrote: >> Yeah, I did that, but still no go. >> I was looking into the code and in the RTP*.java files under the bridge > and >> I get the gist that it doesn't really pay any attention to video codecs. >> And what I mean by not pay any attention and why that would be an issue is >> that we are seeing that "port unreachable" ICMP error. Since it isn't > paying >> attention, it never figures out the port it needs to open - I think, > correct >> me if I'm wrong? >> >> If copy the section that does it for the audio and make it do the same for >> video as well as allow the video codec, that should fix the problem? >> >> FYI - All the signalling is good and we can hear the voice just fine, no >> problem. >> >> Best regards, >> William >> >> On Fri, Dec 10, 2010 at 7:22 PM, Tony Graziano > <[email protected] >>> wrote: >> >>> Have you tried to manually allow the protocol in the allowed list in >>> siptrunking (server>services>sip trunking? Or just to remove all >>> codecs to allow all? >>> >>> >>> >>> On 12/10/10, W. E. W. Russell <[email protected]> wrote: >>> > All, >>> > >>> > We are trying to make a video call to another PBX and it seems that the >>> > voice is fine, but there is no video. >>> > >>> > I did some research and since we were creating a gateway that uses >>> > sipXbridge to call it seems that there are some ports that sipXbridge > is >>> > blocking with ICMP "port unreachable" issues. >>> > >>> > Again the voice is fine, but the video is getting blocked before it > ever >>> > leaves the PBX. Thank you for any help you can provide or direction I >>> > can >>> go >>> > in! >>> > >>> > Best regards, >>> > William >>> > >>> > -- >>> > W. E. W. Russell >>> > Member of Technical Staff (System Integration) at incNETWORKS, Inc. >>> > Alumni of the University of Florida - Fall 2007 - BS in Computer > Science >>> > Active Alumni member of Sigma Lambda Beta International Fraternity, > Inc. >>> > Cell Phone # 732-744-6483 >>> > Work Phone # 732-483-1511 >>> > Blackberry Pin: 30E9FD36 >>> > >>> >>> -- >>> Sent from my mobile device >>> >>> ====================== >>> Tony Graziano, Manager >>> Telephone: 434.984.8430 >>> sip: [email protected] >>> Fax: 434.326.5325 >>> >>> Email: [email protected] >>> >>> LAN/Telephony/Security and Control Systems Helpdesk: >>> Telephone: 434.984.8426 >>> sip: [email protected] >>> >>> Helpdesk Contract Customers: >>> http://support.myitdepartment.net >>> >>> <http://support.myitdepartment.net>Blog: >>> http://blog.myitdepartment.net >>> >>> Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 >>> _______________________________________________ >>> sipx-dev mailing list >>> [email protected] >>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ >>> >> >> >> >> -- >> W. E. W. Russell >> Member of Technical Staff (System Integration) at incNETWORKS, Inc. >> Alumni of the University of Florida - Fall 2007 - BS in Computer Science >> Active Alumni member of Sigma Lambda Beta International Fraternity, Inc. >> Cell Phone # 732-744-6483 >> Work Phone # 732-483-1511 >> Blackberry Pin: 30E9FD36 >> > > -- > Sent from my mobile device > > ====================== > Tony Graziano, Manager > Telephone: 434.984.8430 > sip: [email protected] > Fax: 434.326.5325 > > Email: [email protected] > > LAN/Telephony/Security and Control Systems Helpdesk: > Telephone: 434.984.8426 > sip: [email protected] > > Helpdesk Contract Customers: > http://support.myitdepartment.net > > <http://support.myitdepartment.net>Blog: > http://blog.myitdepartment.net > > Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > -- Sent from my mobile device ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net <http://support.myitdepartment.net>Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
