You have to address this internally. PSTN prefixes are by default "9". You have set yourself up for a conflict. It's always good to plan your numbering scheme before deploying it.
On Fri, Jan 7, 2011 at 7:41 AM, Kumaran < [email protected]> wrote: > Hi > Suppose, the default "Emergency" dial plan topmost in order on the dial > plan screen is configured as follows: > PSTN prefix = 8 > Emergency number = 911 > > Next the default "Voicemail" dialplan lowest in order on the dial plan > screen is configured as follows: > Voicemail inbox prefix = 8 > > The call made to the emergency number dialed as 8911 reaches the mailbox > of user 911. Is this correct? What can be the solution for this problem > ? (other than not using the PSTN > > Regards > Venkateshwaran T > [email protected] wrote: > > Send sipx-dev mailing list submissions to > > [email protected] > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://list.sipfoundry.org/mailman/listinfo/sipx-dev > > or, via email, send a message with subject or body 'help' to > > [email protected] > > > > You can reach the person managing the list at > > [email protected] > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of sipx-dev digest..." > > > > ------------------------------------------------------------------------ > > > > [please change the subject line when replying] > > ------------------------------------------------------------------------ > > > > Today's Topics: > > > > 1. sipXecs 4.2 :NOTIFY message with empty body > > ([email protected]) > > 2. Dial Plan--PSTN Prefix (Kumaran) > > 3. Re: Dial Plan--PSTN Prefix (Todd Hodgen) > > 4. Re: sipXecs 4.2 :NOTIFY message with empty body (Joegen Baclor) > > 5. sipXtapi - build environment on windows (Mahudeswaran) > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > [sipx-dev] sipXecs 4.2 :NOTIFY message with empty body > > From: > > <[email protected]> > > Date: > > Fri, 7 Jan 2011 01:00:46 +0000 > > To: > > <[email protected]> > > > > To: > > <[email protected]> > > > > > > Hi All, > > > > The new version of sipXtackLib (4.2) doesn't seem to support sending of > NOTIFY messages > > with empty body.It treats Subscription as failure instead. > > > > Below is the code segment in SipSubscribeServer::handleSubscribe() > > // Note that since this NOTIFY is due to a SUBSCRIBE, > > // it should contain 'full' content. Hence, > > // the fullState parameter of getNotifyContent is TRUE, > > // and is not taken from > > // eventPackageInfo->mEventSpecificFullState. > > UtlString availableMediaTypes; > > if (handler->getNotifyContent(resourceId, > > eventTypeKey, > > eventType, > > > *(eventPackageInfo->mpEventSpecificContentMgr), > > acceptHeaderValue, > > notifyRequest, > > TRUE, > > &availableMediaTypes)) > > { > > .... > > } > > else > > { > > // No content was available, so the subscription fails. > > // Determine the reason and set the response code. > > .... > > } > > > > However as per RFC 3265 > > If the resource has no meaningful state at the time that the SUBSCRIBE > message is processed, > > this NOTIFY message MAY contain an empty or neutral body.See section > 3.2.2. for further details on NOTIFY message generation > > > > Is this a bug in the stack or am I missing something? > > > > Regards, > > Gauri > > > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > [sipx-dev] Dial Plan--PSTN Prefix > > From: > > Kumaran <[email protected]> > > Date: > > Fri, 07 Jan 2011 12:21:17 +0530 > > To: > > [email protected] > > > > To: > > [email protected] > > > > > > Hi All > > While working on Dial plan through unmananged gateway,I changed the > > PSTN prefix as 8 from 9 and the emergency is same 911. When i Dial 911 > > the call is landed on unmanaged gateway.But i tried 8911 the call is > > connected IVR(voice mail inbox of 911) and played the prompt that user > > extension not valid. Soo working wise its correct because 8 + Ext is > > Voicemail inbox prefix.But my question is why SipXconfig is not > > throwing a error message when changing PSTN prefix to 8 because prefix > > 8 is already Voicemail inbox prefix. It also reflecting in linux > > console as -<userPattern>8811</userPattern> > > Regards > > Venkateshwaran T > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > Re: [sipx-dev] Dial Plan--PSTN Prefix > > From: > > "Todd Hodgen" <[email protected]> > > Date: > > Thu, 6 Jan 2011 23:39:07 -0800 > > To: > > "'sipXecs developer discussions'" <[email protected]> > > > > To: > > "'sipXecs developer discussions'" <[email protected]> > > > > > > In the dial plan, 8+3 digits is a different scenario than 8+10 digits, > and > > acceptable. Additionally, a dial plan of three digits exactly 911 would > be > > different as well, and acceptable. > > > > If you had an access code of 81 and 82 and then three digits to dial two > > offsite systems, that wouldn't necessarily be a conflict with dialing 8+ > 3 > > digits for local voicemail. > > > > I would agree the system should throw an error when two dial plans are > the > > same. But just because 8 is used at the beginning of two dial plans > doesn't > > necessarily make it wrong, or unacceptable. I think if you further > define > > your dial plans, and make sure they are in the correct order things will > > work differently. > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Kumaran > > Sent: Thursday, January 06, 2011 10:51 PM > > To: [email protected] > > Subject: [sipx-dev] Dial Plan--PSTN Prefix > > > > Hi All > > While working on Dial plan through unmananged gateway,I > > changed the PSTN prefix as 8 from 9 and the emergency is same 911. When > > i Dial 911 the call is landed on unmanaged gateway.But i tried 8911 the > > call is connected IVR(voice mail inbox of 911) and played the prompt > > that user extension not valid. Soo working wise its correct because 8 + > > Ext is Voicemail inbox prefix.But my question is why SipXconfig is not > > throwing a error message when changing PSTN prefix to 8 because > > prefix 8 is already Voicemail inbox prefix. It also reflecting in linux > > console as -<userPattern>8811</userPattern> > > Regards > > Venkateshwaran T > > _______________________________________________ > > sipx-dev mailing list > > [email protected] > > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > > > > > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > Re: [sipx-dev] sipXecs 4.2 :NOTIFY message with empty body > > From: > > Joegen Baclor <[email protected]> > > Date: > > Fri, 07 Jan 2011 19:58:35 +0800 > > To: > > sipXecs developer discussions <[email protected]> > > > > To: > > sipXecs developer discussions <[email protected]> > > > > > > I do not see anything wrong in the code. The handler could do anything > > it likes with the notify and return TRUE even if there is currently no > > state. Are you reporting a specific bug in a sipxecs event package. > > MWI, RLS? > > > > > > On Friday, 07 January, 2011 09:00 AM, [email protected] wrote: > >> Hi All, > >> > >> The new version of sipXtackLib (4.2) doesn't seem to support sending > >> of NOTIFY messages > >> with empty body.It treats Subscription as failure instead. > >> > >> Below is the code segment in SipSubscribeServer::handleSubscribe() > >> // Note that since this NOTIFY is due to a SUBSCRIBE, > >> // it should contain 'full' content. Hence, > >> // the fullState parameter of getNotifyContent is TRUE, > >> // and is not taken from > >> // eventPackageInfo->mEventSpecificFullState. > >> UtlString availableMediaTypes; > >> if (handler->getNotifyContent(resourceId, > >> eventTypeKey, > >> eventType, > >> *(eventPackageInfo->mpEventSpecificContentMgr), > >> acceptHeaderValue, > >> notifyRequest, > >> TRUE, > >> &availableMediaTypes)) > >> { > >> .... > >> } > >> else > >> { > >> // No content was available, so the subscription fails. > >> // Determine the reason and set the response code. > >> .... > >> } > >> > >> However as per RFC 3265 > >> If the resource has no meaningful state at the time that the > >> SUBSCRIBE message is processed, > >> this NOTIFY message MAY contain an empty or neutral body.See section > >> 3.2.2. for further details on NOTIFY message generation > >> > >> Is this a bug in the stack or am I missing something? > >> > >> Regards, > >> Gauri > >> _______________________________________________ > >> sipx-dev mailing list > >> [email protected] > >> List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > >> > > > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > [sipx-dev] sipXtapi - build environment on windows > > From: > > "Mahudeswaran" <[email protected]> > > Date: > > Fri, 7 Jan 2011 17:39:19 +0530 > > To: > > "sipXecs developer discussions" <[email protected]> > > > > To: > > "sipXecs developer discussions" <[email protected]> > > > > > > Hi, > > > > I need some help on setting up the sipXtapi build environment for > > windows OS. And followed the instructions said in the below url, > > > > http://sipxtapi.sipfoundry.org/wiki/SipXtapi_Windows_Build_Environment > > > > The build solution completed with 32 errors and warnings, which is > > attached in the err.txt file. > > > > Tried the steps mentioned as part of pre-requisites and etc… > > > > Any one experienced similar cases. > > > > Environment where I am building the sipXtapi is on windows7 (32bit) > > and VS2005 standard edition. > > > > Suggestion: To whom we have to contact for any modification in the web > > page. Modification related to the build instructions which makes the > > user to clarify few points while reading. > > > > Regards > > > > Mahudeswaran > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > sipx-dev mailing list > > [email protected] > > http://list.sipfoundry.org/mailman/listinfo/sipx-dev > > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net <http://support.myitdepartment.net>Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
