correct, the header translation is missing the nat part. it does work if sipx is not behind nat.
On Fri, Mar 11, 2011 at 3:45 AM, Kumaran <[email protected]> wrote: > Hi Tony, > Thanks for your update.So this option will not work properly > according to your issue XX-9501.Therefore cannot get a Inbound call through > IP Based Authentication. > > Rgrds > Kumaran T > > Tony Graziano wrote: >> >> This allows sip trunk calls to come in on port 5060 >> >> The relay flags inbound invites from port 5060 that come from the ITSP >> gateway IP address and sends them to the proxy by rewriting the header >> to port 5080. This is to accomodate ITSP's who cannot send to port >> 5080. >> >> On Fri, Mar 11, 2011 at 2:28 AM, Kumaran >> <[email protected]> wrote: >> >>> >>> Hi All, >>> What is the use of the option Bridge-Proxy relay in >>> Server->proxy->Advance Setting?Can anyone described it briefly? >>> Please Guide >>> >>> Rgrds >>> Kumaran T >>> >>> >> >> >> >> > > -- ====================== Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.326.5325 Email: [email protected] LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Contract Customers: http://support.myitdepartment.net Blog: http://blog.myitdepartment.net Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 _______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
