make sure the ring time on did at voip.ms is set for more than 60 seconds (the default from them).
On Fri, Nov 2, 2012 at 8:31 AM, Kumaran < [email protected]> wrote: > Hi All, > I have assigned DID number to hunt group extension..In hunt group call > sequence is set as 201 will ring first for 30 sec, then if no response then > 202 will ring for 30 sec and use VM is enabled....When pstn user dial the > DID number call lands on user 201, that ring for 30 sec and then 202 rings > for 30 sec..Once the 202 doesn't answer the call,the beep sound is heard to > Pstn user and call disconnect..Please check the attached pcap file..Our > Itsp is Voip.ms > If i try calling above scenario through internal extension then Call is > forwarded 202 VM if hunt group user doesn't answer the call.. > > Regards, > Kumaran T > > _______________________________________________ > sipx-dev mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-dev/ > -- ~~~~~~~~~~~~~~~~~~ Tony Graziano, Manager Telephone: 434.984.8430 sip: [email protected] Fax: 434.465.6833 ~~~~~~~~~~~~~~~~~~ Linked-In Profile: http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4 Ask about our Internet Fax services! ~~~~~~~~~~~~~~~~~~ Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab 2013! <http://sipxcolab2013.eventbrite.com/?discount=tony2013> -- LAN/Telephony/Security and Control Systems Helpdesk: Telephone: 434.984.8426 sip: [email protected] Helpdesk Customers: http://myhelp.myitdepartment.net Blog: http://blog.myitdepartment.net
_______________________________________________ sipx-dev mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-dev/
