Then make up your mind. Are you reporting an audio code bug or
investigating why it is connected in CDRs? It is conencted in CDR
because IT IS CONNECTED. If you are investigating audiocodes interop
with ITSP, please send a packet capture directly showing packet exhcnge
between this two components and not from home.
On 11/16/2012 06:57 PM, Kumaran wrote:
No Joegen,its not successful call.Audiocodes sends 200 OK.Either
external users answers or not there will 200OK from Audiocodes.So
CDR shows Completed instead of Abandon.But this behavior is not seen
in ITSP...
Regards,
Kumaran T
On 11/16/2012 1:37 PM, Joegen Baclor wrote:
This is a successful call. Why do you expect this to be flagged as
abandoned?
On 11/16/2012 01:11 PM, sangeetha.prem wrote:
Hi,
Please find the pcap file attached.
Thanks
Sangeetha
------------------------------------------------------------------------
-------- Original Message --------
Subject: Re: [sipx-dev] [Fwd: Re: Query on Call Status for a call
from PSTN phone to Mobile number]
Date: Thu, 15 Nov 2012 19:21:39 +0800
From: Joegen Baclor <[email protected]>
Reply-To: sipXecs developer discussions <[email protected]>
To: sipXecs developer discussions <[email protected]>
References: <[email protected]>
<CAMgKNJWYi=U+Lp=bfua34rpqu7ekqha0cynygq19vnptpej...@mail.gmail.com>
There is a chance that this is a race condition on call cancellation
where CANCEL is being sent while 200 OK is already traversing the
wire. In this case, the call-termination mechanism will be a
time-out in ACK. However, CDR will show sucess because it base the
connected flag on receipt of 200 OK. If this is the case, then it
is not a bug. Too many assumptions here. a packet capture will
shed light.
On 11/15/2012 07:11 PM, Tony Graziano wrote:
correct
On Thu, Nov 15, 2012 at 5:56 AM, sangeetha.prem
<[email protected] <mailto:[email protected]>> wrote:
Hi All,
Thanks for the reply, so can i raise an issue since the call
status is displayed as "Completed" instead of "Abondoned" when
the subscriber hung up before there was an answer.
Thanks
Sangeetha
Tony Graziano wrote:
if there was no answer
Subscriber --> PSTN
and the subscriber hung up before there was an answer, then
the cdr should say "abandoned".
On Thu, Nov 15, 2012 at 5:30 AM, sangeetha.prem
<[email protected] <mailto:[email protected]>>
wrote:
Hi All,
Make a call from Phone 1 to Mobile number and do not
answer the call
on Mobile or reject the call from mobile, In CDR historic
page call
status is displayed as "Completed" instead of "Abondoned"
. What is the
expected Call Status?
Thanks
Sangeetha
_______________________________________________
sipx-dev mailing list
[email protected]
<mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
<mailto:[email protected]>
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about
sipX-CoLab 2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]
<mailto:[email protected]>
Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
------------------------------------------------------------------------
_______________________________________________
sipx-dev mailing list
[email protected] <mailto:[email protected]>
List Archive:http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected] <mailto:[email protected]>
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
--
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: [email protected]
<mailto:[email protected]>
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~
Using or developing for sipXecs from SIPFoundry? Ask me about
sipX-CoLab 2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: [email protected]
<mailto:[email protected]>
Helpdesk Customers: http://myhelp.myitdepartment.net
<http://myhelp.myitdepartment.net>
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-dev/
------------------------------------------------------------------------
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive:http://list.sipfoundry.org/archive/sipx-dev/
_______________________________________________
sipx-dev mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-dev/
