On Thu, 2008-06-12 at 18:38 +0530, Padmaja R wrote: > Hi all, > > I had initially installed sipx 3.10.1 stable version on centos 5 using > rpms and it was not working well because some jobs failed. So I > uninstalled and reinstalled sipx again and ran the sipxpbx configtest: > > All the components are fine except sipxcallresolver-agent which is > disabled (but status shows OK)
That's fine - that is only enabled on a multi-system cluster configuration. > and sipxproxy: > sipXpbx: sipXpbx configuration problems found: > sipXpbx: > sipXpbx: Check sipXproxy > sipXpbx: SIP route to SIPXCHANGE_DOMAIN_NAME 'sipx.com' is not to my > IP address: 192.168.50.52 > sipXpbx: See the installation guide on setting the DNS SRV records > and domain names > The dnsdomain name of installation is sipx.com and the hostname of the > pc is pbx.sipx.com. With the current configuration, I am able to > register but when I make calls, the invite sent from proxy to the > destination UA has four via fields in it, because of which the dest UA > is ignoring the invite. The proxy is sending invite also via TCP and > after 4 or 5 retries, playing some greeting to the caller saying > destination is unavailable and asking to record the message even if > destination is actually available. Please tell me if the above issues > are connected and how I can solve them. You can reduce those Vias by one by installing the DNS records as instructed, which will also eliminate that diagnostic warning message. It sounds like the phones you're using can't do large UDP datagrams and can't do TCP. Find better phones. -- Scott Lawrence tel:+1.781.229.0533;ext=162 or sip:[EMAIL PROTECTED] sipXecs project coordinator - SIPfoundry http://www.sipfoundry.org/sipXecs CTO, Voice Solutions - Bluesocket Inc. http://www.bluesocket.com/ http://www.pingtel.com/ _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
