Scott Barr wrote: > I have about 30 of these phones with the Standard version of the > firmware and all register without issue and work fine until.. > > ...you hit 20 minutes on a call and the call automatically drops. I have > been able to reproduce this with several phones and it is consistent. > > I have many Polycom 430s and 601s that work just fine. I am using sipX > 3.10 and have a regular configuration on the Siemens phones based on the > Siemens admin manuals and what I have found to work with sipX - except, > of course, when a call is dropped precisely 20 minutes. > > Has anyone experienced a similar issue? Resolved? > > Thanks, > > -stuck >
I have lots of these phones, all of them using Cornet IP protocol. I tested some Optipoint with a SIP firmware, and I had a problem like this, but I can't remember all the steps I took to resolve it. Which firmware version do you have? Point your browser to the following link, and see if there's a release note related to a firmware version that addresses your problem. http://wiki.siemens-enterprise.com/index.php/optiPoint_410/420_S_Release_Notes Bye, Max -- Massimo Vignone CeSIA - Università di Modena e Reggio Emilia Phone: +39.059.2058032 Fax: +39.059.2058034 sip:[EMAIL PROTECTED] ISN:8032*881 _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
