Hi, thanks for all replies. Sorry for my delay to answer to your questions and suggestions and to make the tests.
I increased the log level to debug and did the trace. I will attach the trace file here. I will try explain also my configuration. As you know i'm trying to get working Sipxecs 3.10 with OSBC. Both are on the same box. In sipxecs i have not change a lot of things. 1. I have set the dns records for this domain and host properly, how is explained in sipx wiki. I made all tests for dns records, and everything is ok with them. 2. I set the domain name in sipx (System -> Domain -> Domain Name to be myrealm.com, not the host name). 3. I enabled Internet Calling (System -> Internet Calling -> I set default SBC to by sipxhost.myrealm.com). This is the hostname of the server where are installed sipx and OSBC. 4. I imported my users from LDAP as i checked every user one by one to be set properly. This is what i did in sipx. OSBC configuration: 1. I set in OSBC-General-Parameters the SBC-Application-Mode to be B2BUpperReg Mode 2. Added interface sip:*:8000 3. Trusted Domains -> I set Accept-All-Cals 4. Host Access List -> I set Trus All Hosts 5. UpperRegistration -> Added this route ([sip:[EMAIL PROTECTED] sip:myrealm.com 6. I added the same route for B2BRoute at the begging for tests. In the same of the trace these are explanation of components. [EMAIL PROTECTED] try to call to [EMAIL PROTECTED] (During the test both machines are behind the same network). sipx.myrealm.com is the host where are installed sipx and OSBC. 87.xxx.xxx.102 is the ip address of the hpst where are sipx and OSBC. 87.xxx.xxx.161 is the public ip address of the network behind its are located both softphones. In trace i see "Trying with code 100". I get this code when i try to call between 2 Macintosh, located in the same network. I will attach also the logs from OSBC with log level 5. The softphones are set this way: domain: myrealm.com, authentication and user name: myusername Outbound proxy: sipx.myrealm.com:8000 I'm analyzing right now the sipviewer screen. Regards, Ali Nebi! On Fri, 2008-10-31 at 08:08 -0200, Melcon Moraes wrote: > I'm afraid your logs don't mean anything, really. You need to increase > the loglevel of sipXproxy to INFO, at least, an then create a trace > file. > > See: > > http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display > > when you get the trace data, take a look at it using sipviewer and/or > post the trace with a description of your configuration (identify > components by IP address), what you were doing, and which call in the > trace you're talking about (by call-id or frame number in the trace, > preferably). _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
