Alberto,
The Sipuras are definitely frustrating units... First, did you verify that the FXS is actually getting registered to the PBX? Second, did you activate your dial plan after you added the gateway to the dial plan entries? Third most common culprit is DNS configuration. Mike From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto Furtado Sent: Sunday, November 02, 2008 1:04 PM To: [email protected] Subject: [sipx-users] Unable to dial out, 404 Not Found Code Hi All, I am testing a basic system for a future implementation. I have tested several configurations with 2 Sipura 3102(1FXS/1FXO) and a SipXecs 3.10.2 CentOS5 Server. But I am unable to dial out using the PSTN gateway. This is my setup: 1. Only one User configured. 2. One Sipura configured to register to this User. 3. One Unmanaged Gateway configured to the address of second Sipura PSTN port. 4. Second Sipura configured not to register. 5. Added the Gateway to Emergency and Local Dial Plan. The User side seems OK, I can dial 101 (or other extensions, when configured), but when I try to dial anything else I get a busy signal. Using sipviewer I can see that the sip.myserver.com-SipRegistrar returns a 404 Not Found Code, and that the server never tries to contact the Second Sipura. I have read the manuals, the wiki and the posts and found nothing similar to my problem. I am probably missing out on something very simple in the configuration of the server. I would REALLY appreciate any suggestions!!! Thanks in advance for the patience with a newcomer, Alberto PS: Its been as exhausting week after being unable to install on Fedora, unable to use the auto-installation that only boots in machines that have Via chipsets and crash. But I was able to get very interesting configurations to work, like configuring 2 Users in each Sipura 3102, one on the Voip1(FXS) an another on the Voip2(FXO) using the VoIP->PSTN gateway. When I dial the user in Voip2 port I get the line out dial tone and can call out.And using the PSTN->VoIP when I call in to the PSTN port I get the tone signal of the SipXecs. Installation problems are complicated but the SipXecs seems to be very powerful and rich in features.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
