Ryan, After looking at your config, I think your problem may be that you're using "SENDINVITETOPROXY = 1" which can cause the SIP conversation with the proxy to work (which is where your AA's live, etc), but not SIP conversations with other devices besides the proxy itself.
I also noticed that you're using a configured IP address for your proxy even though your DNS query type appears to be set to SRV; are you using SRV records? If so, you should just have ProxyAddress set to your SIP domain name and not specify that IP address of the proxy. This might be causing weird problems... I see that you're trying to register as well; that shouldn't be needed if this FXO gateway is connected to the PSTN, and the registration attempt is failing according to your log. You should probably also consider enabling answer supervision and using polarity or current disconnect instead of silence disconnect (again assuming a U.S. PSTN connection). Without answer supervision but PRACK enabled, outbound calls can have the appearance of completing only to be disconnected after the IP alerting timeout expires because the gateway didn't know the call was actually answered. Without the proper disconnect supervision, the PSTN line stays lit for several seconds longer than it should after the call ends. I'm attaching a copy of the config from one of our working MP-118's connected to the PSTN. Let me know if you have any questions, I'd be glad to help... Steve Farr -----Original Message----- From: Ryan Quigley [mailto:[email protected]] Sent: Tuesday, January 06, 2009 6:16 PM To: Farr, Steven C. Cc: [email protected] Subject: Re: [sipx-users] Audiocodes MP-118 FX0 auto dialing to non-operator Hi Steve, Thanks for getting back to me. Attached are my AC call logs with debug set to 5. working_log.txt is when Automatic Dialing is set to # 100, broken_log.txt, when it's set to # 300 (or any user extension for that matter). My config file is also attached. Tony, I went with 3.11.9 because a) I'm already running 64bit CentOS on an Opteron and b) I was under the impression that 3.11/4 is coming out in February and should be pretty stable at this point. I've since discovered this isn't so true as functionality seems to be on/off on a day by day basis. All the best, Ryan
GJ-MP118_2008-12-04-01.ini
Description: GJ-MP118_2008-12-04-01.ini
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
