Been through the (limited) training on the Valcom unit about 6 months ago but have not used it yet.
Mike From: Tony Graziano [mailto:[email protected]] Sent: Thursday, January 22, 2009 10:56 AM To: Picher, Michael; [email protected] Subject: RE: [sipx-users] Integration with door access control systems I am using a Keri NXT door system. I didn't know valcom was also in the business. Have you used this particular device yet? >>> "Picher, Michael" <[email protected]> 01/22/09 9:47 AM >>> Actually meant Valcom... http://www.valcom.com/Home_links/sipdoorintercom.htm I don't think Keri has a native SIP solution. If you have analog ports on a gateway available, almost any of the analog solutions should work. Press the button, the phone goes off-hook, have the gateway do automatic ring-down to a SIP extension. Once in a conversation usually pressing # will send DTMF which the Door Phone device will hear and fire a relay. Mike > -----Original Message----- > From: [email protected] [mailto:sipx-users- > [email protected]] On Behalf Of Picher, Michael > Sent: Thursday, January 22, 2009 9:39 AM > To: Tony Graziano; [email protected] > Subject: Re: [sipx-users] Integration with door access control systems > > Right... > > Did you check Keri too? > > > -----Original Message----- > > From: Tony Graziano [mailto:[email protected]] > > Sent: Thursday, January 22, 2009 9:34 AM > > To: Picher, Michael; [email protected] > > Subject: Re: [sipx-users] Integration with door access control > systems > > > > Yes, but I wanted to be able to press a button on the phone that > > answers to trigger the door to open. A standard gateway doesn't have > > the relay built in which is why I was looking at products that are > made > > to open doors at the same time. > > -----Original Message----- > > From: "Picher, Michael" <[email protected]> > > To: Tony Graziano <[email protected]> > > To: <[email protected]> > > > > Sent: 1/22/2009 9:26:29 AM > > Subject: RE: [sipx-users] Integration with door access control > systems > > > > You can also do automatic ring-down from a Polycom phone or from an > > analog port on a Patton gateway... > > > > > > > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Tony > > Graziano > > Sent: Thursday, January 22, 2009 9:09 AM > > To: [email protected] > > Subject: [sipx-users] Integration with door access control systems > > > > > > > > I have been looking at a couple of different products that have a sip > > based "call" button for use at an external door that could call a > hunt > > group (UPS delivery, etc.) and allow someone to pickup the phone and > > press a button which would trigger a relay to open/unlock a door. > > > > I have looked at both the Cyberdata and Aleen products: > > > > http://www.cyberdata.net/products/voip/voip-intercom.html > > > > http://www.its-tel.com/info.asp?id=48 > > > > Has anyone done either of these? Does anyone have other success with > > this type of integration? > > > > Tony > > > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
