I figured out my issue. With 3.11.9 I had to go back to a previous suggestion and change the server ip address on my phones to the dns name of my server. This is the exact opposite I did in 3.10.1 version where it like the ip address and not the DNS Name. Thanks Scott
-----Original Message----- From: Scott Lawrence [mailto:[email protected]] Sent: Monday, February 09, 2009 4:50 PM To: Gilmour, Scott Cc: [email protected] Subject: Re: [sipx-users] 3.10.1 to 3.11.9 On Mon, 2009-02-09 at 16:09 -0500, Gilmour, Scott wrote: > Hi, > > I reloaded 3.10.1 and was able to get my Siemens Optipoint 410 advance > phones to work with the Polycomm Soundpoint IP 600/601 v2.0 Phone > configuration. > > Then I said lets upgrade to 3.11.9 and do the exact same > configuration. After upgrading to 3.11.9 when I make a call from > extension 300 to extension 2000 I still get the same message when > trying to make a call (Cleared – Unknown) > > With the annoying sound like a busy signal for example. So there must > be something else that was added to the 3.11.9 that needs to be > enabled in order to get my phones to work. Hopefully we can figure > this out so other people don’t run into the same issue. Yes, it would be good. But we can't figure out anything without hard data. "annoying sound" is not useful debugging information (if only it were - we'd be able to solve a lot more problems a lot more quickly). To debug this, you'll need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
