Not exactly sure what is getting seen by the user. It's at a site about an hour and a half away and this report was from a user.
I assume, call comes in to the 650 and no callerid displayed & then xferred to a 330 and the user sees caller-id. I'll need to do a little more digging but I just wanted to see if anybody else had experienced this. Thanks, Mike -----Original Message----- From: milosz [mailto:[email protected]] Sent: Fri 2/13/2009 2:25 PM To: Picher, Michael Cc: [email protected] Subject: Re: [sipx-users] callerid on poly 650's vs. 350's have you done any investigation? is it actually getting passed and just not appearing? are you talking about name appearance, number appearance? what does the display on the 650's show for an incoming call? On Fri, Feb 13, 2009 at 2:17 PM, Picher, Michael <[email protected]> wrote: > And of course by Polycom 350 I really mean Polycom 330. > > > -----Original Message----- > From: Picher, Michael > Sent: Fri 2/13/2009 1:58 PM > To: [email protected] > Subject: callerid on poly 650's vs. 350's > > > Any reason why callerid would get passed through to Polycom 350's but not to > 650's? > > sipX 3.10.3, Polycom firmware 3.1.1 and bootrom 4.1.2, Patton SN4118's w/5.2 > firmware. > > Thanks, > Mike > > _______________________________________________ > sipx-users mailing list > [email protected] > List Archive: http://list.sipfoundry.org/archive/sipx-users > Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users >
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
