Is there a * code that can be dialed from a registered phone to
call-fwd the line at the server level, without having to login via the
GUI?
Scott Lawrence wrote:
On Fri, 2009-02-27 at 10:48 +1100, Graeme Allen wrote:
Hi All,
I have a Cisco 7940 registered and working with SipX, but the Call
Forward All facility on the phone does not seem to work with SipX.
when a call is sent to the 7940, an invite is sent from SipX to the
phone, and the phone replies with a "302 Moved Temporarily" with the
call forward destination in the "Contact:" field. Copy of the exchange
below.
The call does not forward to the destination in the contact header,
rather is goes to the SipX voicemail for that phone.
Can SipX work with the Call Forward All facility on a Cisco handset? I
know that call forwarding can be done via the SipX GUI, and this does
work well, but it is much more user friendly to be able to do it from
the handset.
The short answer is No.
The problem is that the 302 from the phone can't be authenticated, so
any call that requires some permission to make (such as an outside
number) will fail (and then roll over to voicemail, if any).
The sipXecs-based forwarding allows the user to securely forward any
caller to anywhere that the forwarding user is allowed to call, but the
phone can only successfully forward to targets that require no
permissions.
http://sipx-wiki.calivia.com/index.php/How_to_configure_User_Call_Forwarding#Do_Not_Use_Phone-based_Forwarding_To_External_Numbers
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
|
_______________________________________________
sipx-users mailing list
[email protected]
List Archive: http://list.sipfoundry.org/archive/sipx-users
Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
