On Thu, 2009-04-16 at 12:51 +0000, wenjun wrote: > Hi, > > I am configuring a unmanaged PSTN gateway to my SIPX. The out-going > call was well done but the in-coming PSTN call through SIPX Auto > Attendant transfer was failed. The in-coming PSTN call was connected > to Auto Attendant with welcome announcement. While when I entered > expected extension number and then got the call transfer announcement, > this call was terminated without any response. > > Is there anything I have to config ?
No... Are you able to call the phone you were trying to transfer to from some other phone? It's possible that your gateway (what is it?) doesn't do transfers correctly. If the gateway has a log, look there. To debug this, you'll may need to trace the message flow and see what's going wrong. See: http://sipx-wiki.calivia.com/index.php/Display_SIP_message_flow_using_Sipviewer#Getting_SIP_Messages_to_display when you get the trace data, take a look at it using sipviewer and/or post the trace with a description of your configuration (identify components by IP address), what you were doing, and which call in the trace you're talking about (by call-id or frame number in the trace, preferably). _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
