> > > Restarting did not help here. > I made a second HA installation on another System. Same issue. > Maybe a general Problem with the 4.0 release? > > René > > > 2009/4/29 Kevin Thorley <[email protected]> > > > > On Wed, 2009-04-29 at 11:25 +0200, Rene Pankratz wrote: > > I recently installed SipX 4.0.0-015321 (stable > release from yesterday) > > on a distributed system. > > > > After Installing the Master i added a server in the > webinterface and > > installed the distributed System (Sip-Router is the > only role). > > But the distributed system does not work and services > are shown as > > disabled in the webinterface. > > > > Any suggestions? > > > > Thanks in advance > > > > René > > > > > > > Try restarting sipXconfig on the primary. I believe > this is necessary > to get the certificate from the distributed host to be > recognized. I > ran into this last week and it fixed my problem. > > Kevin > >
I have an HA system working with sipx 4.0 rev15333, and a redundant SIP router. Does your secondary server status show "Registered"? Also you will have to re-run sipxecs-setup on the secondary server if the certificates have been changed on the primary server. Dave. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
