Hello everyone, I had a Cisco CME integrated with a SipXecs 3.10.3 working perfect. I had a dial peer (call leg) pointing to the SipXecs and a SipTrunk gateway on the SipXecs pointing to the Cisco CME and then the Dial Plan and life was good (for the most part).
I got a brand new server and installed SipXecs 4.0 with the same configuration as before, now when I try calling from the SipXecs to the CME it calls fine but when I try Cisco to the SipXecs if I call the auto attendant it rings and the AA answers just fine but if I try an extension off SipXecs it get disconnected right away, and if I try dialing a SipXecs extension from CME it goes fast busy right away. Now I think the issue has to do with the new implementation of the Bridge, it's my understanding that the bridge is handling all incoming calls into the SipXecs, I think for some reason it doesn't accept the calls going to extensions that are not part of the internal system, I even created a park extension and call it directly just fine. Any help on getting this to work would be greatly appreciated, our goal is to move 100% on the SipXecs 4 and use the Cisco CME as a gateway only. Thanks, Jhony _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
