> I'm new to sipXecs and I'm having problems getting it to register with > either of my ITSPs (Vitelity and Les.net). I'm not sure if the problem > is firewall/NAT related or if I simply have something configured wrong. > > When I configuring the Devices->Gateway->Vitelity->SIP Trunk->ITSP > Account settings I used the Vitelity template for vitelity and the > les.net template for les.net. I didn't fill any of the advanced settings > in, just the same username and password as I did when I was using > trixbox. Also since I'm behind a router with NAT, I went to > System->Server->[myhostname]->NAT and turned on Use STUN with the STUN > server set to stun01.sipphone.com, interval 60 and port 5060. I then > went to Internet calling and selected Enable NAT traversal and Server > behind NAT. > > I'm reasonably sure that the STUN server is working fine because this > appears regularly in my sipXproxy.log: > > StunClient::getPublicIpAddress obtained public IP address 207.161.86.206 > from server stun01.sipphone.com (which is the correct IP) >
Okay I've made some progress on this problem. I'm now able to receive inbound calls on my LES.NET trunk. As long as I only go to voice mail they work fine. However this still leaves three problems: 1) Vitelity doesn't work. I don't think it's registering. However since LES.NET is, that suggests that it probably isn't a NAT issue (I may be wrong here). 2) If I pick up the call at my extension (Aastra 57i) instead of letting the call go to voice mail the call drops after 3 seconds (this doesn't happen if I let it go to voice mail). 3) My outbound dialing doesn't seem to work. The best I can get is "No route is available to complete this call" message from an operator - the same operator that I heard when having dialing problems under trixbox. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
