In both cases the registration is from the same IP address. In the second case the connection says it is behind NAT and has additional information on how to reach the phone behind NAT.
Normally you would register a phone from the LAN, and it would not be behind NAT. In that instance the registration would show the private IP address with "x-sipX-privcontact=xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the address the phone has). >>> "Boy Aidil Sjam" <[email protected]> 05/31/09 10:47 PM >>> Hi All, I have a question about registration status in diagnostic tab for remote worker. 1. If a remote user registered to the server with "[email protected]:26116;rinstance=61e4a43ba568d13d;x-sipX-nonat" status, the remote user able to call the others extension and vice versa. 2. If a remote user registered to the server with "[email protected]:25666;rinstance=c70131baba02eaf3;x-sipX-privcontact=122. 129.193.23%3A25666" status, the remote user able to call the others extension but other users extension unable to call to that extension (the call goes directly to VM) My question is "what's the different between both status?" Thanks in advanced, B. Aidil DISCLAIMER: Information in this message is confidential and may be legally privileged. It is intended solely for the addressees. Access to this message by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message in error. _______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
