I set up pbx as the primary, pbx1 as the secondary. I delete pbx1 from the server screen, restart the services it requests to restart, and reinstall pbx1. I then click "Add a server" on pbx to set up pbx1 again. I re-used the old hostname/IP of pbx1. I copy the password it gives me for pbx1 to register, put it on pbx1 and hit next but it throws this error at me:
"[Errno socket error] (-2, 'Name or service not known')" pbx shows the following in the logs repetitively: ==> /var/log/sipxpbx/sipxcallresolver.log <== "2009-06-04T08:52:31.881378 ":ERR:Loss of connection to database - retrying to connect after sleep ==> /var/log/sipxpbx/sipxstunnel.log <== 2009.06.04 08:52:31 LOG5[3863:1085081920]: Postgres-1 connected from 127.0.0.1:47273 2009.06.04 08:52:31 LOG3[3863:1085081920]: Error resolving 'pbx1.pfnnet.net': Neither nodename nor servname known (EAI_NONAME) 2009.06.04 08:52:31 LOG3[3863:1085081920]: No host resolved 2009.06.04 08:52:31 LOG5[3863:1085081920]: Connection reset: 0 bytes sent to SSL, 0 bytes sent to socket CDR hangs and won't restart. I reboot and the same thing shows up in the logs. I still can't register pbx1. I restore from yesterday's backup and allow it to restart itself. I check the servers screen and it says that pbx1 is registered. I click pbx1 and use the old setup password and the socket error still persists. I also discovered if you were in the process of setting up the secondary and wanted to change the IP, Hostname, Admin password, DHCP or DNS roles you must reinstall or configure them manually. Running sipxecs-setup would only allow me to begin at the "First Server" or "Adding a server" screen.
_______________________________________________ sipx-users mailing list [email protected] List Archive: http://list.sipfoundry.org/archive/sipx-users Unsubscribe: http://list.sipfoundry.org/mailman/listinfo/sipx-users
